|
|
|
|
#1
08-02-2013, 04:30 AM
|
||||
|
||||
Maybe one of the TD members can chime in on this. I'm not sure if this is a bug or intended programming.
I wanted to Taxi an AI plane to a particular waypoint and then use the Delay setting to have it sit there for a set time before moving on to the next waypoint. In the screenshot, you can see that I have set a Delay of 2 minutes for the second waypoint. I also set the same Delay for the third waypoint. However, the waypoint Delay setting for a taxiing plane seems to have no effect. Once a plane started rolling, it ignored the Delay setting at all subsequent waypoints. So if it's not a bug, I was wondering why the Delay setting would be there if it has no function? (I understand the Delay setting in the INITIAL waypoint is there to command the plane/flight to start it's engine(s) and begin to taxi.) Aviar
__________________
Intel i7-4790 4-Core @3.60GHz Asus Z97-C Motherboard 16GB DDR-3 1600 SDRAM @800 MHz NVIDIA GTX 760 - 2GB Creative SB ZX SBX Logitech X-530 5.1 Speakers 27" AOC LED - 2752 Logitech G15 Gaming Keyboard CH FighterStick-Pro Throttle-Pro Pedals Logitech G13 Gameboard GoFlight GF-T8 Module WIN 8.1 Last edited by Aviar; 08-03-2013 at 05:56 PM. 
|
|
#2
08-03-2013, 10:44 AM
|
||||
|
||||
|
I think its there just for the initial delay.
__________________
|
 |
|
|
Hybrid Mode
