Alpha PATCH v1.06.17582 with Desastersoft Helmut Wick vs. J. C. Dundas campaign

[shaneuk]

Hi have recently installed the Alpha patch and installed Wick vs Dundas campaigns.

When I start a campaign (Spit or Hurricane) with 100% realism the engine is running and immediately stops when the campaign begins. The result of this is the oil temperature is 100 degrees and I blow my engine when I throttle up for takeoff.

I have noticed that in the stock missions or campaign they load with the engine off and all the temperature gauges are how they should be 0 degrees.

Any Idea what I am doing wrong or has anyone else experienced this?

Help would be much appreciated. Thank you.

[FS~Phat]

Originally Posted by shaneuk

Hi have recently installed the Alpha patch and installed Wick vs Dundas campaigns.

When I start a campaign (Spit or Hurricane) with 100% realism the engine is running and immediately stops when the campaign begins. The result of this is the oil temperature is 100 degrees and I blow my engine when I throttle up for takeoff.

I have noticed that in the stock missions or campaign they load with the engine off and all the temperature gauges are how they should be 0 degrees.

Any Idea what I am doing wrong or has anyone else experienced this?

Help would be much appreciated. Thank you.

I found a way around this was to skip ahead and start the engine and open radiator. When it prompts you for the engine start just repeat the steps again. Its a good question but probably better to post in their new english support forum! http://forum.desastersoft.com/viewfo...5b3b4ccff07989

[shaneuk]

Hi FS~Phat,

Thanks for your help and advice. Will do!