![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
I love it when people try to "downgrade" the time it took someone to do something creative for the community. How you can judge that by one photo is beyond me. It's nice looking. Thanks for the share. |
|
#2
|
|||
|
|||
|
Because you'll most probably don't get an answer from Rodolphe
MG's genious layered template technique makes it easy for everyone to produce stunning skins within minutes. Because all you have to care about is to choose the right colors. Weathering, panel lines, riveting is all part of the engine an will be added automatically. That's why creating good skins is just a matter of minutes. Although Rodolphes skins are stunning! |
|
#3
|
||||
|
||||
|
Rodolphes skins as a rule are delightful, however as pointed out the 108 would take a couple of minutes to do, but thats besides the point isn't it?
Starting with a 'blank' canvas it can take hours to line camo scheme's/patterns etc up, and without a ready made template even longer (as I found making Wellington/Anson/Blenheim and Defiant templates) So to get to the 'couple of minutes' can in fact take many hours or days.
__________________
Regards Chris ![]() http://www.aircombatgroup.co.uk/index.php Gigabyte z77-d3h, Intel Core i5-3570K 3.40GHz (OC 4.2GHz), Corsair Vengeance Low Profile 24GB DDR3 PC3-12800C9 1600MHz Dual Channel Kit , Samsung 120GB SSD 840 SATA 6Gb/s Basic, Seagate Barracuda 7200RPM 1TB SATA 6Gb/s 64MB, Cooling Silencer Mk II 750W '80 Plus Silver' PSU, GTX580 3gb OC |
|
#4
|
|||
|
|||
|
Sorry to raise a slightly heated off topic debate in here. I am very new to skinning and can someone post a thread in the skin index on how to use the templates that were given to us please?
Thanks, Eagle |
|
#5
|
||||
|
||||
|
Not if your the 'Stealth Eagle/Owl' I think you are
__________________
Regards Chris ![]() http://www.aircombatgroup.co.uk/index.php Gigabyte z77-d3h, Intel Core i5-3570K 3.40GHz (OC 4.2GHz), Corsair Vengeance Low Profile 24GB DDR3 PC3-12800C9 1600MHz Dual Channel Kit , Samsung 120GB SSD 840 SATA 6Gb/s Basic, Seagate Barracuda 7200RPM 1TB SATA 6Gb/s 64MB, Cooling Silencer Mk II 750W '80 Plus Silver' PSU, GTX580 3gb OC Last edited by kristorf; 04-23-2012 at 06:01 PM. |
|
#6
|
|||
|
|||
|
Sent you a PM so we don't need to keep this wonderful thread off topic.
|
|
#7
|
|||
|
|||
|
Quote:
Though you are quite right, as I tried to figure out the cowling and detail mapping, which are a mess on the Bf 108, that it can easily take hours to make a proper skins with perfect details and an elaborate camo pattern. This one for example took quite a while just in the research department and is still far from being finished. Not having the template at the time didn't help either...
|
|
#8
|
||||
|
||||
|
Quote:
Many Layers may be required for things like Markings,Camo and weathering etc. Also dont forget the ammount of Reference work required for a specific aircraft to achieve an accurate portrayal. Templates are a fantastic aid and form the basis of any skin But its what is added to it that makes the final result a unique representation of the chosen subject. And there are always those annoying parts of a skin where paint has not shown up properly on the Template overlay and even with Panel Finder can take hours to pin point and rectify Creating Templates can take several Hours\Days as I know from experience[Ju-88 & Do-17] but very rewarding especially if that particular Template does not already exist and even more gratifying to see other Skinners Create amazing Skins using Your Template I respect anyone who has made any type of Skin because they bothered to do it in the first place and in the process someone benefits from using it. Keith Last edited by checkmysix; 04-24-2012 at 05:20 AM. |
|
#9
|
|||
|
|||
|
I can, because I have skinned the Bf108 myself, before we got the templates. So I know what I am talking about.
|
![]() |
|
|