![]() |
|
#1
|
|||
|
|||
![]() Quote:
![]() |
#2
|
||||
|
||||
![]()
Interesting, i find it ungodly that anyone can strap something so beastly to a beautiful merlin.
|
#3
|
|||
|
|||
![]() Quote:
![]() Re. the DB601/605/603 it really shows though how every detail was engineered for aeronautical performance and with quality in mind. The inverted V layout meant that mechanics could work on the cylinder heads without trestles: all the delicate parts of the engine (rockers, injectors) were below (which in dogfights is a clear advantage) and even if hit on the top it would mean that the oil bleeding from the engine would be considerably less than its counterpart, allowing it to survive a bit longer even if damaged. The exhaust stacks weren't in the way of the cockpit and were easily shielded by the top plates, and last but not least you could make good use of the space between the cylinder banks and put a nice big cannon in it. |
#4
|
|||
|
|||
![]()
Agh, the Hispano_Suiza was an upright V12 and had a cannon mounted in the V. The Russians put a 37mm in their version of this engine.
|
#5
|
|||
|
|||
![]()
the DB605 was still produced in Sweden after 1945. but they were very expensive to purchase. Switzerland as example decided to buy cheap used P-51 instead of swedish engines forvthei dozen Bf109G-6.........
and the first version of the spanish 109s had Hispano engines btw. I guess the Merlin gave a better performance ![]() |
#6
|
|||
|
|||
![]() Quote:
|
#7
|
|||
|
|||
![]()
what one is expecting with slave work......all original engines were in a terrible condition, and they were new!
|
![]() |
|
|