What resolutions

[TheGrunch]

Originally Posted by Crossfade

i've just talked the wife into letting me get a 46 inch Sony led and native res is 1920x1080 so didn't want an Epic fail when i show her the difference.
but i think your right should not be a problem.

thanks again for the reassurance

Niiice...I'd have talked a bit longer and more piteously and bagged a 1920x1200 one myself.

[Feuerfalke]

Originally Posted by Crossfade

didn't know that it could go more than 1024x768 because in setup it would only go to that and no more.
so will cod go much higher as standard or will it be the same as il2 and u have to mess with config.

Btw thanks for the replys

As posted before, even IL2 had higher settings available if you had the monitor supporting it.

However, these standard-settings were limited to 4:3.

If you have a 16:9 or 16:10 you're limited to the next lower resolution available in 4:3.


As others have stated, any resolution is possible, including spanning multiple monitors.


I have no doubt that CoD will offer even more options.


BTW: I can at least tell you, that IL2 looks great on 42" 1920x1080 (FullHD)

[Crossfade]

I bet it does can't wait for cod

[camel24hrs]

Originally Posted by Feuerfalke

As posted before, even IL2 had higher settings available if you had the monitor supporting it.

However, these standard-settings were limited to 4:3.

If you have a 16:9 or 16:10 you're limited to the next lower resolution available in 4:3.


As others have stated, any resolution is possible, including spanning multiple monitors.


I have no doubt that CoD will offer even more options.


BTW: I can at least tell you, that IL2 looks great on 42" 1920x1080 (FullHD)

How did you get IL-2 to run at 1920x1080? I have a 22.5" 1920x1080 monitor and a geforce 560ti and the max resolution the program gives me is 1600x1200.

[mcmatt]

I play IL2 at 1920 x 1200. You must edit conf.ini in window block in your Il-2 root directory, which you can open in Notepad or similar. Do not forget to do backup of your original file.

[window]
width=1920
height=1200
ColourBits=32
DepthBits=24
StencilBits=8
ChangeScreenRes=1
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=0
Use3Renders=0

[TheGrunch]

...of conf.ini in your Il-2 root directory, which you can open in Notepad or similar. Missing a rather important piece of information there, mcmatt.

[mcmatt]

Originally Posted by TheGrunch

...of conf.ini in your Il-2 root directory, which you can open in Notepad or similar. Missing a rather important piece of information there, mcmatt.

You're right Grunch Not everybody is messing with conf.ini