Check that all your guns on the Brit fighters are actually firing bullets

[AirHog71]

Originally Posted by ATAG_Snapper

No way to tell. Earlier I got 2 sets of splashes in the water from my outboard guns; afterward I got 8 sets of splashes. That's all I can report.

The fact that you're seeing 2 different splash patterns tells me the sim is picking up the extra guns being fired as the damage model "should" also model world damage from ordinance. So I would assume this does affect damage on aircraft.

This is a huge bug and should be fixed no matter what Illya says. Not everyone will have the know-how to fix this on thier own.

Edit: Just read the fix ... so I take back that not everyone will know how to fix it. Still should be fixed though, I know I'm going to forget to do this before jumping online

[Borsch]

Is this trick with FMB to be done EVERY time before going online?

[trademe900]

I don't understand. How many people are actually having this problem? I'm sure all my guns are working when I shoot the water, but there is no way to ensure you are firing a blip of 1 round from each gun.

Also, what causes this to happen?

[AirHog71]

Originally Posted by trademe900

I don't understand. How many people are actually having this problem? I'm sure all my guns are working when I shoot the water, but there is no way to ensure you are firing a blip of 1 round from each gun.

Also, what causes this to happen?

Referring to this post, is the debug function available in CoD, like in IL2 1946, where you can see arrows where rounds have hit an object?

[Ataros]

When naming loadouts use only standard Latin/international English characters. Loadouts named using special local characters do not work(do not load) in some cases.

[Torian]

Originally Posted by Ataros

When naming loadouts use only standard Latin/international English characters. Loadouts named using special local characters do not work(do not load) in some cases.

Good find Ataros.


Just as an aside while in testing mode....I found the much touted DeWilde ammo to be not all that good really. Others may want to differ on this. I loaded up a Spit with observer rounds in all outside guns and DeWildes in the 2 inner and blazed away at a Heinkel with them and didn't hurt it at all. Loaded up the 2 inner guns with APs instead and inflicted some serious damage. I will prolly do some more testing...maybe with all DeWilde u might get a good burn happening. Anyway for me it will APs in all guns until I am convinced otherwise.

[LoBiSoMeM]

Originally Posted by Torian

Good find Ataros.


Just as an aside while in testing mode....I found the much touted DeWilde ammo to be not all that good really. Others may want to differ on this. I loaded up a Spit with observer rounds in all outside guns and DeWildes in the 2 inner and blazed away at a Heinkel with them and didn't hurt it at all. Loaded up the 2 inner guns with APs instead and inflicted some serious damage. I will prolly do some more testing...maybe with all DeWilde u might get a good burn happening. Anyway for me it will APs in all guns until I am convinced otherwise.

If you want do start fire in fighters, load only De Wilde and shoot in a 109... it'll became a fireball fast... Bombers, with heavy armour, don't have so weak fuel tanks. Use a mix of Ball/AP and De Wilde for better results.

Just as in real Bob!

[macro]

Hi all

I have never been in fmbat all.

I only have 2 loadouts- default and custom. The custom one was made for all my planes when game first came out. I never bothered changing them.


I went into fmb and i could set the loadout of the plane to custom and it had the loadout that i use online in there. Iv tried shooting at ground to see if they are fireing but i cant tell. Anyone got a vid so i can see the difference?

[ATAG_Snapper]

Originally Posted by Borsch

Is this trick with FMB to be done EVERY time before going online?

I hope not!!!!!

[GF_Mastiff]

Originally Posted by Borsch

Is this trick with FMB to be done EVERY time before going online?

no from what I have tested and seen, it works, some people don't have this issue. Some people do.
The best way you can tell is take your tracers and put them in all the guns and then go into a single player mission and test it out on the bombers.or water.

For some reason the custom load outs seem to be broken. and just have to be re-pointed to the load outs, and to do that you have to open FMB. Open a single mission load your plane
right click open properties, go to properties then look down to ammo and pull down list if nothing there, click the [....] button and open that up if it doesn't work saving close the game then restart and try it again. Cliff has a lot of problems with broken code, or the code not loading right.