Can´t get Perfect mode to work

[JacksonsGhost]

I'm no tech guru, but let's see if I can help ...

Have you maxed out all your graphics settings in the "Setup" panel? From memory, Perfect will be greyed out if you don't have certain fields set high enough. You might also need to be set to your native resolution for Perfect mode (I don't know, but it wouldn't hurt to try).

Setting your config.ini to "Read-only" might work with the hardwareshader issue too, but then you will have to remember that your config is read-only.

If you still can't get it to work, try posting your config.ini here, or at M4T as Marabekm suggested, and someone might be able to see the problem.

And if you can get it working in 4.14.1, be aware that 4.15 is also available now if you want it.