JU88 wheel brakes, are they analogue?

[Sokol1]

this time I started installation from DVD, but with game uninstalled I can see it in Steam library and I have an option to install it from there.

I supposed that STEAM install in Cztch, no?
Which leads to the conclusion that the problem is in this version, probably you're the first to try to use the toe brakes JU88 in Czech.

Sound crazy, but if you use KEYS tab for assign axis to right/left brakes?

In English version are the problem that box for set convergences are inverted (fixed with TF patchs).

Vertical is Horizontal and -Vice-versa.

This Printscreen problem is know since first release, work in some computers, in another no (On my never work, you see the "micro-pause", but screens are not saved).

Solution: Remap screenshoot function for another key, I use F-12.
In this case you dont notice "micro-pause".

For default F-12 is used by STEAM for screenshoot, to avoid save in duplicity, remap/remove STEAM key.

Game screenshots are saved in .BMP in ...\Documents\1C SoftClub\il-2 sturmovik cliffs of dover (- MOD if used)\screenshots

STEAM screenshots are saved in .JPG ( in... \Steam\userdata\22405538\760\remote\224780\screens hots

These folders numbers are not for CloD, but is similar, when you find the folder, make a shortcut, or see screenshots inside STEAM.

Sokol1

[latware]

Originally Posted by Sokol1

I supposed that STEAM install in Cztch, no?
Sokol1

yes, as I wrote, Steam is aware that my CloD is czech version (as I registered it in first use of Steam), all my installations defaulted to CZ. I should suppose that game engine is independent from language version, apparently this is not the case.

Originally Posted by Sokol1

Which leads to the conclusion that the problem is in this version, probably you're the first to try to use the toe brakes JU88 in Czech.

Sound crazy, but if you use KEYS tab for assign axis to right/left brakes?
Sokol1

doesn't work, since axis doesn't produce any keypress, so CloD detection don't feel any key. I should have to map emulated keypress to axes, my joy configurator (Foxy) allow it, however it has no sense in my opinion, it would just toggle the brakes. When assigning through AXES tab it "feel" particular axis correctly, also input/output indicators correctly displays the movement of pedals (even with deadzone presets)


anyway I will continue with TF patch and will wait until there will be the patch/troubleshooting for CZ version, I'm not keen to torrent original EN version (however it wouldn't be a crime in moral sense)

[Sokol1]

When assigning through AXES tab it "feel" particular axis correctly, also input/output indicators correctly displays the movement of pedals (even with deadzone presets).

The brake effect in game are O - 100% (not considering animation and "HUD" messages)?

Post this problemn in ATAG - TF forum.

http://theairtacticalassaultgroup.co...splay.php?f=91

Sokol1

[latware]

BINGO! I installed first part of TF suite - 3.0
and now I have analog wheel brakes in Ju-88 too...

So one impuls for developers: what did TF3.0 correct in installation, that prevented czech version from correct assignment of brake pedals?