|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
10-19-2012, 09:46 PM
|
||||
|
||||
Hmmm, pic's I have seen only show black spinners, except for Clowes's.
Going on the info from Neil this one had an all black one.
__________________
Regards Chris  http://www.aircombatgroup.co.uk/index.php Gigabyte z77-d3h, Intel Core i5-3570K 3.40GHz (OC 4.2GHz), Corsair Vengeance Low Profile 24GB DDR3 PC3-12800C9 1600MHz Dual Channel Kit , Samsung 120GB SSD 840 SATA 6Gb/s Basic, Seagate Barracuda 7200RPM 1TB SATA 6Gb/s 64MB, Cooling Silencer Mk II 750W '80 Plus Silver' PSU, GTX580 3gb OC 
|
|
#2
10-20-2012, 12:31 AM
|
||||
|
||||
|
Hi Kris. Regarding the Starboard sidwe, the image I forwarded shows the lettering as O (then the roundel) them JX
It's the image with the group stood in front of the Hurri  Looking fantastic so far! Can't wait Cheers, MP
__________________
|
|
#3
10-20-2012, 07:15 AM
|
||||
|
||||
|
Quote:
|
|
#4
10-20-2012, 07:08 PM
|
||||
|
||||
|
Neil,
Changed the Starboard codes, also lightened the brown a few shades and changed the underside form a duck egg to more sky.    FF, looked in my copy and can't see anything??
__________________
Regards Chris http://www.aircombatgroup.co.uk/index.php Gigabyte z77-d3h, Intel Core i5-3570K 3.40GHz (OC 4.2GHz), Corsair Vengeance Low Profile 24GB DDR3 PC3-12800C9 1600MHz Dual Channel Kit , Samsung 120GB SSD 840 SATA 6Gb/s Basic, Seagate Barracuda 7200RPM 1TB SATA 6Gb/s 64MB, Cooling Silencer Mk II 750W '80 Plus Silver' PSU, GTX580 3gb OC
|
|
#5
10-20-2012, 09:01 PM
|
||||
|
||||
|
Ktistorf, while I appreciate you are trying to make it look accurate....I think the third rivet from the wing Roundel, the one that is just below the parallel one on the opposite side, is in fact at-least 1mm off! I am disappointed with the level of realism you claim to be able to make!!!!
Yeah right! Seriously this looks fantastic. It's just so close to the profile supplied and looks brilliant! Looking forward to seeing it on a Hurricane on my CloD install very soon! BTW, when looking at Hurricane 1 skins, which Hurricane is the one the skin belongs to? I went into Quick Missions and chose a Hurricane, but none said "Hurricane 1" where previous skins had been installed? All I could find was a Rotol and a few others? Which Hurricane do I need to load this skin (when it arrives). Truly fabulous work. Also I must add thanks to larry69. I appreciate the time you spent making yours too. Kris does have a level of detail though that 'ramps' up visual beauty of the skin though. But thanks for the effort and time. Waiting patiently Kris, cheers, MP
__________________
|
|
#7
10-20-2012, 09:53 PM
|
||||
|
||||
|
Cheers Neil,
I will rename it from test and send it on. I will put on the .jpeg it's name but looking at the profile you sent me it fits the Rotol version. (but will go on all really) P.S, I agree with that bloody rivet being out of place.... **e-mail sent mate**
__________________
Regards Chris http://www.aircombatgroup.co.uk/index.php Gigabyte z77-d3h, Intel Core i5-3570K 3.40GHz (OC 4.2GHz), Corsair Vengeance Low Profile 24GB DDR3 PC3-12800C9 1600MHz Dual Channel Kit , Samsung 120GB SSD 840 SATA 6Gb/s Basic, Seagate Barracuda 7200RPM 1TB SATA 6Gb/s 64MB, Cooling Silencer Mk II 750W '80 Plus Silver' PSU, GTX580 3gb OC Last edited by kristorf; 10-20-2012 at 10:11 PM.
|
|
#8
10-20-2012, 11:34 PM
|
||||
|
||||
|
Sorry.. I have to ask.
The markings.. are they correct? On one side, it has O@JX The other side has JX@O I brought this up about luftwaffe markings and have to wonder.. was this plane unique, or is this how british markings were set up? I would have thought if one side was O@JX, the other side would have to be the same O@JX. See the first pic in the following post to see what I'm talking about.. http://forum.1cpublishing.eu/showthread.php?t=34324
|
|
#9
10-20-2012, 11:51 PM
|
||||
|
||||
|
Quote:
Cheers, MP
__________________
|
|
|
|
Hybrid Mode
