He-177

ElAurens · #1 09-18-2012, 04:27 AM

The Curtiss Hawk III biplane, and the Lockheed Hudson come to mind, as does the Lockheed Ventura, which is probably the most overlooked aircraft to serve in the Pacific. It was ubiquitous in the day and now almost totally forgotten.

CWMV · #2 09-18-2012, 05:10 AM

Although the Hudson is a WONDERFUL idea. Would be great for the Med too.

When I think about it we have every mark of Spit, 109, 190, P-51 and -38.
We are missing the P-47M though. Would fill a missing niche for the late war.

I know TD is working on RAF bombers but I havent seen anyone working on these:

JV44Priller · #3 09-18-2012, 05:14 AM

I registered at SAS and sent a mod that I happen to have worked with in the past a PM.

Im more into the unique German aircraft or the later american aircraft. I see there are a whole host of 1945+ aircraft that has been produced and most of my other project ideas went down the tube because they are already been done. Which is not exactly a bad thing either.

CWMV · #4 09-18-2012, 05:20 AM

Quote:

Originally Posted by JV44Priller

I registered at SAS and sent a mod that I happen to have worked with in the past a PM.

Im more into the unique German aircraft or the later american aircraft.

There is also a request thread over at SAS that may give you ideas.

JV44Priller · #5 09-18-2012, 05:40 AM

A P-47M would require a change to LOD 0 for the fillet, and mainly an FM change. I started work on the P-47N a long time ago but had to stop short due to joining the service. The 47N requires the fillet, squared off wing tips, and the wings must be extended(10 or 18inces. Or something along those lines.)

If I could get my hands on the already existing P-47D files then I wouldn't find doing those.

IceFire · #6 09-19-2012, 01:04 AM

Quote:

Originally Posted by JV44Priller

A P-47M would require a change to LOD 0 for the fillet, and mainly an FM change. I started work on the P-47N a long time ago but had to stop short due to joining the service. The 47N requires the fillet, squared off wing tips, and the wings must be extended(10 or 18inces. Or something along those lines.)

If I could get my hands on the already existing P-47D files then I wouldn't find doing those.

Get in touch with some TD folks and doooo it

CWMV · #7 09-19-2012, 01:49 AM

Quote:

Originally Posted by JV44Priller

A P-47M would require a change to LOD 0 for the fillet, and mainly an FM change. I started work on the P-47N a long time ago but had to stop short due to joining the service. The 47N requires the fillet, squared off wing tips, and the wings must be extended(10 or 18inces. Or something along those lines.)

If I could get my hands on the already existing P-47D files then I wouldn't find doing those.

We already have an excellent P-47N over at SAS. Truly a great plane. I'm sure one of the modders over there can square you away.

http://www.sas1946.com/main/index.ph...c,18224.0.html

JV44Priller · #8 09-19-2012, 05:37 AM

Quote:

Originally Posted by CWMV

We already have an excellent P-47N over at SAS. Truly a great plane. I'm sure one of the modders over there can square you away.

http://www.sas1946.com/main/index.ph...c,18224.0.html

And there it is.

Just another reason that Im considering not doing anything at all. I haven't been around in so long I have no clue what's going on. I dont want to put a good bit of time into something only to find out that someone else is about done with it.

There doesn't seem to be a list of WIP or completed planes anywhere making it even harder to figure out which plane to do.

ElAurens · #9 09-19-2012, 03:25 AM

Quote:

Originally Posted by CWMV

Although the Hudson is a WONDERFUL idea. Would be great for the Med too.

When I think about it we have every mark of Spit, 109, 190, P-51 and -38.
We are missing the P-47M though. Would fill a missing niche for the late war.

I know TD is working on RAF bombers but I havent seen anyone working on these:

Can't argue with the British bombers. The Chinese Hawk III is very nice looking, however it's not in HSFX so I have no clue where it came from. Also I'm hoping that it can be in the stock version of the sim. I don't do mulitple mod installs. One is almost too many.

CWMV · #10 09-19-2012, 03:36 AM

Sadly with HSFX the way it is its difficult to add ANY other aircraft in expert mode.
I'm telling you though, its a beaut in the game. I have it in my DBW and I believe there has been an emd extraction for it to make it possible to add to HSFX 6.