|
|
|||||||
| IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
06-25-2012, 09:40 PM
|
||||
|
||||
Well I see the red square flash blue once, but I using your methods I have not being able to get Xfire working
 ... what DX10 profile do you use?Btw here are some pics... FYI it constantly flickers between the two. 1st Issue Flashing Skin  free picture hosting  img upload 2nd Issue Flashing Terrain  upload picture  photo upload 3rd Issue A Mix of Both  image host  image upload  image upload  image host  free image hosting  hosting images  img upload  image host And to think the game was looking like this  img upload  picture hosting  free image hosting I don't know why I can't get Xfire to work at all now
__________________
 Quote:
Gigabyte X58A-UD5 | Intel i7 930 | Corsair H70 | ATI 5970 | 6GB Kingston DDR3 | Intel 160GB G2 | Win 7 Ultimate 64 Bit |
MONITOR: Acer S243HL. CASE: Thermaltake LEVEL 10. INPUTS: KG13 Warthog, Saitek Pedals, Track IR 4. Last edited by JG52Krupi; 06-25-2012 at 09:43 PM. 
|
|
#2
06-25-2012, 09:58 PM
|
||||
|
||||
|
Oh and before anyone ask epilepsy is not on and does not stop the issue
__________________
Quote:
Gigabyte X58A-UD5 | Intel i7 930 | Corsair H70 | ATI 5970 | 6GB Kingston DDR3 | Intel 160GB G2 | Win 7 Ultimate 64 Bit |
MONITOR: Acer S243HL. CASE: Thermaltake LEVEL 10. INPUTS: KG13 Warthog, Saitek Pedals, Track IR 4.
|
|
#3
06-25-2012, 10:55 PM
|
|||
|
|||
|
I have 2x 6950's. I get this issue when I forget to limit my frame rate.
I fly with vsync on so I use dxtory to limit the frames to 58. It negates input lag and it prevents cpu and gpu spiking, which I suspect is the cause of that problem.
|
|
#4
06-25-2012, 10:57 PM
|
||||
|
||||
|
I will have to give that a go thanks for the tip Hippy.
__________________
Quote:
Gigabyte X58A-UD5 | Intel i7 930 | Corsair H70 | ATI 5970 | 6GB Kingston DDR3 | Intel 160GB G2 | Win 7 Ultimate 64 Bit |
MONITOR: Acer S243HL. CASE: Thermaltake LEVEL 10. INPUTS: KG13 Warthog, Saitek Pedals, Track IR 4.
|
|
#5
06-25-2012, 11:33 PM
|
|||
|
|||
|
Oh, I should add, that in CCC > Gaming > 3d Application settings > AMD CrossFireX Mode for 3d Applications > Use AMD pre-defined Profile. I use the Lost Planet dx10 profile. (LostPlanetDx10.exe).
All the other settings in that screen you should be able to adjust to your preference. Basically everytime I run Launcher.exe now, it slaps the Lostplanet Crossfire profile on. If it actually makes a difference or it's just a placebo, I am not exactly sure. But I don't get the above-mentioned issues anymore. The game flys really smooth, with minimal micro-stuttering when I'm looking around frantically whilst doing high speed turns over London. Worth a crack anyhoo. Good luck!
|
|
#6
06-26-2012, 06:46 AM
|
||||
|
||||
|
Yes I use the lost planet dx10 exe as well.
__________________
Quote:
Gigabyte X58A-UD5 | Intel i7 930 | Corsair H70 | ATI 5970 | 6GB Kingston DDR3 | Intel 160GB G2 | Win 7 Ultimate 64 Bit |
MONITOR: Acer S243HL. CASE: Thermaltake LEVEL 10. INPUTS: KG13 Warthog, Saitek Pedals, Track IR 4.
|
|
#7
06-26-2012, 05:28 PM
|
|||
|
|||
|
Hey m8 , WOW Did a little checking around last night, I saw some pics ,1 had open gl prob ,other was corrupt drivers, 1 was even game was corrupt. Also might want to check an make sure each vid card is working, Also check each stick of ram. But i would start with drivers
|
|
|
|
Hybrid Mode
