A newbies impression of the 109 and spit

[MiG-3U]

Originally Posted by robtek

Sorry NZTyphoon, but to say that the bobweights were introduced because of the "poor loading ad squadron level" sounds absolutely unconvincing to me.

The bobweights were used to reduce the ease of motion when actuating the elevators, reducing this way the possibility to inadvertently overstress the airframe, regardless of the flightsituation (spin, overspeed or else).

http://target4today.co.uk/_posted_im...11/CoG_Iab.jpg

The inertia device (bob weighs in other words) was not needed if the CG was forward enough and the later marks, (VIII, IX...) did not have the device because the heavier engine moved the CG forward, 4-5 in. aft of datum point, except rare case of rear fuselage tank.

It can be said that the original CG limits were too aft with Rotol propeller and longitudal stability suffered, hence warnings in the early version of the Spitfire II manual. However, warnings were removed once the limits were revised.

Over and out