How to use MW-50

[II./JG1_Krupinski]

Originally Posted by ddmd80

I have been looking for information about the use of the MW-50 system installed on some German fighters. I have read that you only turn it on at or below 50 percent thottle or you can damage the engine (which I have done several times above that setting). 1. When can I use it? 2. How long can I keep it engaged? 3. At what power setting should I engage it. Any limitations, tips, or links would be great.

Thanks for the help

Throttle must be set to allow manifold pressure to be below boost level, noted by white tick mark on gauge. This will work fine - but must snap throttle back to a low setting and engage it.

You can use it anytime, 109D-9 you can engage TWICE over 9000 meters and get NITROUS as well.

Length of time varies on plane, but generally 20-30 minutes I believe.

If you overheat reduce throttle or you will burn your motor.