Engine Start??

[Al Capwn]

Originally Posted by binky9

How do I do a Steam Verify?

Sorry,

binky9

No need to apologize, just right click on your game in the library view -> Properties -> Local Files -> Verify Integrity of Game Cache.

Also, it just occurred to me. Have you read the proper start procedure for your plane since enabling CEM? Make sure you turned on both magnetos and put your fuel cock to primary.

[badfinger]

Thanks for the headsup.

I have been using CEM for some time, now, and just the other night started having this problem.

binky9

[Al Capwn]

Originally Posted by binky9

Thanks for the headsup.

I have been using CEM for some time, now, and just the other night started having this problem.

binky9

Oh, OK. Well in that case, I definitely would look in your Documents folder -> 1C SoftClub -> il-2 sturmovik cliffs of dover and in there you can clear your cache folder.

The next step I would take is then to rename your confUser.ini to confUser.old (if you can't see extensions, on any explorer window -> Organize -> Folder and search options -> View -> uncheck Hide extensions for known file types) and when you launch the game it will rebuild a fresh one.

It will take a little longer on the first load up, it's just rebuilding the cache.

I hope something in there solves your issue, those planes aren't going to shoot themselves down!

[badfinger]

Originally Posted by Al Capwn

Oh, OK. Well in that case, I definitely would look in your Documents folder -> 1C SoftClub -> il-2 sturmovik cliffs of dover and in there you can clear your cache folder.

The next step I would take is then to rename your confUser.ini to confUser.old (if you can't see extensions, on any explorer window -> Organize -> Folder and search options -> View -> uncheck Hide extensions for known file types) and when you launch the game it will rebuild a fresh one.

It will take a little longer on the first load up, it's just rebuilding the cache.

I hope something in there solves your issue, those planes aren't going to shoot themselves down!

I have tried just about everything I can think of, plus all of the suggestions. Nothing has solved the problem. I still can't believe I could go from everything working just fine, to not being able to start the engine, just by finishing one mission, and starting another.

Should I re-install, and how do you do that? Will I lose all of my missions, skins, settings, etc?

Thanks,

binky9

[Al Capwn]

Originally Posted by binky9

I have tried just about everything I can think of, plus all of the suggestions. Nothing has solved the problem. I still can't believe I could go from everything working just fine, to not being able to start the engine, just by finishing one mission, and starting another.

Should I re-install, and how do you do that? Will I lose all of my missions, skins, settings, etc?

Thanks,

binky9

Hmm... Well if you did a steam verify, I don't see a re-install solving anything. Not that it would hurt to try, but try just one more thing first.

Backup your entire 1C SoftClub folder inside of your Documents folder, and then just delete the whole folder (or you can just cut that folder and paste it somewhere safe). You won't have any of your custom missions but we're just trying to test for now. On game start up you'll have to redo your graphics settings, but leave controls at default for now; 'I' is start engine default. You'll also have to probably re-enable all the realism settings such as CEM. Then choose a mission you can take off from, I usually choose 'Cross-Country' under 'Quick Missions' and just choose any plane you want.

See if you can get that engine turning over!

Also, to remove games on steam, just right click on the game in your Library view -> Delete Local Content

[badfinger]

Al,

Thanks for coming back. I was afraid I was suddenly on my own.

I followed your instructions, without any success, I'm afraid. I saved a copy of the 1C Softclub file to my desktop, and deleted the original. When I started CoD, and checked the control settings, I saw that they had not gone back to the defaults. Joystick, throttle, gear, flaps, etc were the same as before. Since "I" still doesn't do anything, I'm suspicious. It looks like the new 1C softclub file is the same as before.

What do you think?

binky9

[Al Capwn]

Originally Posted by binky9

Al,

Thanks for coming back. I was afraid I was suddenly on my own.

I followed your instructions, without any success, I'm afraid. I saved a copy of the 1C Softclub file to my desktop, and deleted the original. When I started CoD, and checked the control settings, I saw that they had not gone back to the defaults. Joystick, throttle, gear, flaps, etc were the same as before. Since "I" still doesn't do anything, I'm suspicious. It looks like the new 1C softclub file is the same as before.

What do you think?

binky9

Don't worry, I'll help you get through this! But that is really strange. There are only two things that come to mind, is possibly the .ini files in your il-2 game directory have been modified (I'm pretty sure it creates the fresh .ini's from these) or it could possibly be the steam cloud is using old files.

Go into your 1C SoftClub folder and remove the 4 .ini files in there, then if you go to your il-2 game directory; default will most likely be 'C:\Program Files (x86)\Steam\steamapps\common\il-2 sturmovik cliffs of dover' and delete the 4 .ini files there.

After that, If you go to your steam library view and right click on il-2 -> properties -> Updates -> Uncheck 'Enable steam cloud' (just for now) then -> Local Files -> Verify Integrity of game cache.

Hopefully that gets your settings back to default, and then we can go from there!