Engine Start??

[aus3620]

hi binky7,

Four confUser files does not sound right! I'm only guessing so hopefully someone else here with more knowledge will chime in.

In the confUser file is a section: [Hotkey pilot]
quote

[HotKey pilot]
Joystick1+Key1=trigger1
Z=rudder_leftx
X=rudder_rightx
W=thtl_110
Joystick+Key15=airbrake
Control NumPad-9=site_alt_plus
V=landingflaps_d
Shift BackQuote=engselect_all
Control NumPad-8=site_dist_plus
T=thtl_psicutout
Control NumPad-7=site_spd_plus
Control NumPad-6=site_side_right
R=rad_auto
Control NumPad-5=site_auto
Control NumPad-4=site_side_left
Joystick2+Key0=trigger01
Control NumPad-3=site_alt_minus
Joystick+Key0=pitch_plus
Control NumPad-2=site_dist_minus
Control NumPad-1=site_spd_minus
I=enginei01
Joystick+Key14=trigger3
G=uc
Control Z=ruddert_left
F=landingflaps_u
Control X=ruddert_right
Control W=abwurf_arm
B=wheelbrakex
Control T=thtl_slowcutout
Equals=thtl_plus
9=extinguisher
6=rad_plus
5=rad_minus
Control G=uc_down_emer
Shift 8=engselect_n7
Joystick+Key12 Joystick+Key18=autorudder_off
Shift 7=engselect_n6
Shift 6=engselect_n5
Control C=pilot_switch
Shift 5=engselect_n4
Control B=bombbaydoors
Shift 4=engselect_n3
Shift 3=engselect_n2
Shift 2=engselect_n1
Shift 1=engselect_n0
Down=elevator_downx
Right=aileron_rightx
Up=elevator_upx
Left=aileron_leftx
Control 7=rudder_leftx
Joystick+Key12 Joystick+Key17=autorudder_low
Shift Down=elevatort_ndown
Shift Right=aileront_right
Space=trigger0
Shift Up=elevatort_nup
Shift Left=aileront_left
Joystick+Key12 Joystick+Key16=autorudder_high
Joystick1+Key3=trigger2
Joystick+Key3=pitch_auto
MouseLeft=MouseControl
Underscore=thtl_minus
Backspace=thtl_wep
Joystick+Key2=pitch_minus

unquote

Looks like some are default and some I've set (joystick commands).

Edit one of the confUser files and check what the [Hotkey Pilot] section looks like. Rename the others, suffix a number or whatever (confUserold1, ...), so you only have one confUser file.

All I can suggest at the moment, other than a re-install!

Good Luck!