Transmission Realism?

nicknackpaddywack · #1 03-18-2008, 06:37 PM

Is the transmission (h gate) shift achieved by key / button strokes?

Flagman_20 · #2 03-18-2008, 08:33 PM

Well even though I'm not sure, I think that there'll be a button to change between the Hi/Lo range. But I'm not so sure you'll be able to split gears. Hopefully yes

Maybe Evgeny can confirm this?

nicknackpaddywack · #3 03-19-2008, 01:17 PM

on the g25 shifter each gear represents a button, if u have a shifter with more buttons u can achieve more gears? its very easy to implement a range shift and splitter, extremely easy i can build a shift gate consisting of 6 gates 6 buttons and each button can represent a 3 gears from the press of a switch or two. check my post on building your own shifter, i will be soon uploading diagrams!

Flagman_20 · #4 03-19-2008, 05:08 PM

Well in my opinion, the G25 would be compatible for 13/18 gears. When you reached 6th, you pressed a button to switch to the Hi range, and then 1st would become 7th/8th, 2nd would become 9th/10th, ect... (maybe I'm not numbering the gears right?) it wouldn't be hard, just a matter of making the same control for the 1st to become 7th when the button was pressed. Good luck on building the shifter by the way

nicknackpaddywack · #5 03-19-2008, 07:48 PM

Quote:

Originally Posted by Flagman_20

Well in my opinion, the G25 would be compatible for 13/18 gears. When you reached 6th, you pressed a button to switch to the Hi range, and then 1st would become 7th/8th, 2nd would become 9th/10th, ect... (maybe I'm not numbering the gears right?) it wouldn't be hard, just a matter of making the same control for the 1st to become 7th when the button was pressed. Good luck on building the shifter by the way

its extremely easy to use 1 switch for 3, if u get me. 1 switch could be easily made into 3 functions by the flick of another switch (range shift) check my other thread tomorrow i will upload the diagrams to explain

Flagman_20 · #6 03-19-2008, 09:30 PM

Yea no worries, I know what you mean. It's just a matter of making some sort of "trigger"

nicknackpaddywack · #7 03-20-2008, 12:09 PM

Quote:

Originally Posted by Flagman_20

Yea no worries, I know what you mean. It's just a matter of making some sort of "trigger"

thats the easiest part, ive even found a way of implementing an 18 speed shifter and clutch into 18 wos

my designs will be upon the forum within the next day