Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik: Cliffs of Dover > Technical threads > Controls threads

Controls threads Everything about controls in CoD

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 01-01-2012, 11:27 AM
RAF74_Taipan RAF74_Taipan is offline
Registered Member
 
Join Date: Oct 2007
Posts: 11
Default

Does anybody know whether there is extra drivers for these devices. Ive looked for hours and cant find anything. (No disc either). Secondly the two progams i did download were

GFconfig Version Version 2.03 Build 1. Absolutely useless unless you want microsoft flight sim.

However this certainly recognises the 3 components.

The other program was GoFlight Key Mapper Version 1.5 Build 83.

Again this recognises the 3 components. Select a control and that controls light will blink. You can then easily "set keys" using the keyboard.




Here is the GF RP48 .gfk file (mapping file").

[GFRP48_1]
K1+=LSFT+AUXHOME
K1+D=Gyro Compass
K1-=LSFT+AUXEND
K1-D=Gyro Compass
K2+=LSFT+AUXINS
K2+D=Course Setter
K2-=LSFT+AUXDEL
K2-D=Course Setter
K3+=LSFT+AUXUAROW
K3+D=Sight Distance
K3-=LSFT+AUXDAROW
K3-D=Sight Distance
K4+=LSFT+AUXLAROW
K4+D=Adjust Sight Left
K4-=LSFT+AUXRAROW
K4-D=Sight Adjust Right
S1+=TAB+LCTL
S1+D=Send Message
S1-=
S1-D=
S2+=LCTL+Q
S2+D=Flash Net Stats
S2-=
S2-D=
S3+=`
S3+D=Toggle Net Stats
S3-=
S3-D=
S4+=
S4+D=
S4-=
S4-D=
S5+=
S5+D=
S5-=
S5-D=
S6+=
S6+D=
S6-=
S6-D=
S7+=
S7+D=
S7-=
S7-D=
S8+=
S8+D=
S8-=
S8-D=

And the same in the options section in the cliffs of dover.



And the actual from the ini file. Just the important section

[HotKey pilot]
Joystick3+Key1=trigger1
Joystick1+Key1=motorcomp_stop
Joystick+Key1=wheelbrakex
Joystick1+Key8=aileron_0
Joystick+Key15=uc_up
Joystick3+Key0=trigger0
Joystick1+Key0=enginei01
Joystick1+Key7=mag0_on
Shift R=ruddert_left
Shift G=site_dimmer
Shift E=elevatort_nup
Joystick1+Key6=elevator_0
Joystick+Key13=uc_down
Shift A=aileront_left
Alt R=ruddert_right
Joystick1+Key5=oilrad_minus
Joystick+Key5=MouseControl
Shift Insert=peilzeiger_p
Alt E=elevatort_ndown
Joystick1+Key4=oilrad_plus
Shift Down=site_dist_minus
Shift Right=site_side_right
Alt A=aileront_right
Shift Up=site_dist_plus
Joystick+Key11=thtl_wep
Shift Left=site_side_left
Shift Home=directionindi_p
Shift End=directionindi_m
Shift PageDown=altimeterknob_m
Shift PageUp=altimeterknob_p
Shift Delete=peilzeiger_m

Joystick+Key3=wheelbrakeltx
Joystick1+Key10=rudder_0
Joystick1+Key2=tankselector0
Joystick+Key2=wheelbrakertx
Joystick1+Key9=mag1_on

I have also sent an email to go flight, and posted on their forum which at this moment over the xmas period silent.

I did notice this.

for

K1+D=Gyro Compass

K1+=LSFT+AUXHOME
and
Shift Home=directionindi_p

Last edited by RAF74_Taipan; 01-01-2012 at 11:31 AM.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.