Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik: Cliffs of Dover > Technical threads > Controls threads

Controls threads Everything about controls in CoD

Reply
 
Thread Tools Display Modes
  #1  
Old 11-18-2011, 03:17 PM
MadBlaster MadBlaster is offline
Approved Member
 
Join Date: Oct 2010
Posts: 666
Default

Was flying 190d last night and thought of this post. I don't fly 190 much in the past. Anyway...

I think they modeled a torque limiter for high manifold pressures in the 190. So if you run the mp's up high, say 1.8 ata with the mw50 or added fuel injection on, you can manually increase the rpms to say 3500 rpm at 100% prop pitch. But you can only lower them down to 3000 rpm at 0% prop pitch due to I guess, the torque limiter in effect. I suppose this makes sense to avoid strain on the crankshaft. So, to decrease further, say 2600 at 0% prop pitch, you must lower the mp's (i.e., turn the mw 50/injection off and reduce throttle). The d9 accelerates really good and you can cruise at very high speed at 1.2-1.3 ata with rads closed. None of this rads at 2, 102 throttle and mw50 all day long. That is not optimal in any case. You waste fuel and have no heat reserve for battle.
Reply With Quote
  #2  
Old 11-22-2011, 12:46 AM
orangec orangec is offline
Registered Member
 
Join Date: Nov 2011
Posts: 9
Default

Can someone explain relations between flight altittude and propeller pitch ?
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:01 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.