Landgeom=3 DOES NOT WORK

crazyivan1970 · #1 01-24-2008, 08:53 PM

Under what weather settings are you trying LandGeom? It is only enabled for clear and good weather as far as i know.. maybe that`s the problem?

Aviar · #2 01-24-2008, 10:32 PM

I believe that you need to use Perfect mode to take advantage of this feature.

Aviar

crazyivan1970 · #3 01-25-2008, 12:43 AM

Most definitely, perfect mode is the must... but based on his conf.ini he is in perfect mode...

KG26_Alpha · #4 01-25-2008, 01:06 PM

Double check your running in OGL and Not DX ?

KOM.Nausicaa · #5 01-25-2008, 02:05 PM

Use Open GL.

Luffe · #6 01-25-2008, 02:49 PM

Quote:

Objects still appear and disappear at the same distance as before.

By objects I mean houses, trees, ships etc.

Landgeom=3 only increases the view distance of the landscape itself (horizon), not the objects you mention.

Golden_Eagle_FM · #7 01-25-2008, 07:50 PM

I am in OpenGL mode, and in Perfect mode too.
I checked the difference between the various waether modes and with the two values for LandGeom, 3 and 2. I did the test with identical scenes.
Unfortunately I see really no difference at all.
So as a conclusion in my case it does not work.
But if it is true that this feature does not work for objects that have been put on the maps then I do not see the interest. We want to avoid to have the objects pop up as we fly. If there is no change for that then I do not see really what do we need it for.

Gold