![]() |
|
IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
This is the single most important aspect of successfully setting up FreeTrack: on the "Cam" tab (right side of FreeTrack as you open the program) you have to see the LED dots and nothing else.
If that doesn't happen, you are doing something wrong, as the guys before me suggested: -> you have parasitic light sources - remove them or change to IR LEDS + visible light filter for your camera (exposed photo film works best in my experience, or you can try with the floppy disk material); -> your camera settings are wrong - set the camera in such a way that you will only get the LEDs. This might not be possible in daytime with visible light LEDs unless you have some serious blinds at your window. The quality of the dots ![]() |
#2
|
||||
|
||||
![]()
Adding to Korn's statements:
In the dot tab you can determine the minimum and maximum pixel sizes for the led dots. Adjusting these can help with "extra" dots from unwanted light sources. Set the minimum dot size to the minimum of where the led dot is marked with a cross when you turn your head to its maximum deflection when playing. And set the maximum dot size when you look directly at the camera.
__________________
AMD 1055T Hexacore@3,4GHz - 2x4GB 1600MHz DDR3 - ATI 6950 2GB, flashed to 6970 shaders - Windows 7 Ultimate 64-bit - 30" LG W3000H (2560x1600) - TM Warthog Stick + Cougar Throttle - wooden DIY pedals with Hall sensor - FreeTrack Last edited by Untamo; 10-06-2011 at 05:50 AM. |
![]() |
|
|