Setting up Sli

RickRuski · #1 10-02-2011, 03:35 AM

Hi Span_Valalo,

I know it says it is an overclocking tool but I use it to take my clock settings back to "standard" ( de-clock factory O/C), and run my two cards at stock clocks. Don't think that it is solely an O/C tool, you can also use it in reverse in partnership with "Inspector" and then syncronise both cards to same clocks.

e.g.

Memory clock factory setting: - 1900
My setting: - 1804 (both cards)

Shader clock factory setting: - 1700
My setting: - 1566 (both cards)

Cheers

Rick

15.Span_Valalo · #2 10-02-2011, 09:23 AM

Very good this program mate, tnks for sharing.

other question to O/C GTX 275 Zotar...

How I can I overclock the graphics card safely?? where I can find references overclocling me??

thks Risk

RickRuski · #3 10-02-2011, 07:17 PM

Hi Span_Valalo

If you haven't already, join "Nvidia Sli Club" which is at the Nvidia site.

http://www.nvidia.com/page/home.html

You will find lots of relevant information there, also help with you cards as to O/C. There are different threads for each series of Cards, just put your questions there just the same as you would here. The only thing is, they will scan your system to make sure it is a "SLI" system before they will allow you to join. If you have a "Genuine" SLI system and not a "Hybrid" there should be no problems.

Cheers

Rick

335th_GRAthos · #4 10-03-2011, 06:06 AM

Quote:

Originally Posted by RickRuski

a "Genuine" SLI system and not a "Hybrid" there should be no problems.

What is a "Hybrid" SLI system?????

~S~

RickRuski · #5 10-03-2011, 06:12 AM

Hi Grathos,

See this @ Nvidia: -

http://www.nvidia.com/object/hybrid_sli.html

Cheers

Rick

335th_GRAthos · #6 10-03-2011, 06:23 AM

Cheers Rick!

RickRuski · #7 10-03-2011, 06:52 AM

Hi People,

I have been doing some trial changes to the "Inspector Profile" and would like some help to see how this works for others.
If anyone would like to try these changes to see how they work for you and give me some feed back. ( remember to backup the original profile, I won't do any changes to that in the post until I can see the results).

Line: -

Text filtering-NegativeLOD Bias = Clamp (Change to "Allow")
Text filtering-Trilinear opt. = OFF (Change to "ON")
Max pre-rendered frames = 3 (Change to "0")
Triple buffering = OFF (Change to "ON")

These changes seem to have made some minor improvements to "stutter" in "London Attack" single player.

Cheers

Rick

Remember to make similar changes in control panel.