I have recently built a "SLI" system for the first time and wondered how to get it working. Decided to join "Nvidia sli Club" and from there have got some information for Sli settings. I am using "Nvidia Inspector" to set a profile and have increased the performance, (I am running two Gts 450's, one EVGA and one Asus, couldn't get another EVGA here in NZ which I bought first ) and then installed "Nvidia's" SLI patch version 1. With the first try the two cards were running at temp's (after reaching normal running deg's) about 2--3 deg difference @ 56--59 deg with the EVGA being the higher. After installing the SLI patch both cards are now running @ about 58---59 Deg's. I am getting FPS over land with cockpit "ON" ranging between 60---70fps, with cockpit "OFF" around 90fps, over water 100fps+. The graphic settings I am using are mainly high, with a couple on med. This sim certainly works better with SLI than ROF which is absolutely hopeless with broken graphics. The SLI patch is available at Nvidia. I am still trying different profiles to get the best results but am very happy so far. Those of you who are running SLI join the "SLI Club" if you haven't already, you may get some good information from there. Any one who is running 2 x GTX 460's and above should be getting great frame rates without hardly trying. How do I run ROF?? answer: - I disable SLI in Nvidia settings. If any one has a another way to get SLI running in ROF I would be happy to hear from them.
System Specs : -
AMD M4N98TD-EVO
Phenom 965 x 4core CPU (no o/c)
8gig Ram
1 Tb HDD (5 partitions)
GTS 450 x 2
700w P/S Cooler Master single rail 52a 12v+
|
08-26-2011, 09:42 PM
Threaded Mode