![]() |
|
|
|
#1
|
||||
|
||||
|
my very old fraps version works with cod since release
__________________
GTX570 @940Mhz watercooled Q6600 @3,9Ghz watercooled HP w2207 22" (1680x1050) Eheim 1250 Toyota Radiator XP Home 32bit & Win7 64bit Crucial SSD C300 64GB TrackIR 3 Pro Hotas Cougar + 18cm Extension +Hall Sensors |
|
#2
|
|||
|
|||
|
Confirmed working.
|
|
#3
|
|||
|
|||
|
Got the latest version of FRAPS the other day too. Is working alright again.
Just to clarify in case anyone needs to know - The latest Cliffs Of Dover patch (1.02.14821) had conflicts with newer versions of FRAPS. Older versions of FRAPS, up to and including version 3.1.2, still worked alright. But the latest FRAPS version (3.4.6) has fixed the conflict. |
|
#4
|
||||
|
||||
|
seems not to work anymore with 3.5.9
I have reinstalled fraps, IL2, even moved it to another hard driver Fraps will not work it loses focus and all I recored is a black screen.
__________________
71st Eagle Squadron www.anon6.com - Blogger on DCS Series 71st Mastiff's You-Tube " any failure you meet is never a defeat; merely a set up for a greater come back " Asus||i7x5930k||16gb3200||GTX10808gb||ATX1200Corsa ir||CBTitanium7.1||Win10x64||TrackIr4Pro/ir||gladiator pro mkII||siatekpedals||X52Throttle||G15Keyboard/RazerMouse|| 32"LCD||2x7" lilliputs,1x9inc |
|
#5
|
|||
|
|||
|
Who needs fraps, MSI Afterburner is just as good and it is for free!
__________________
My Il-2 CoD video web site: www.flightsimvids.com |
|
#6
|
||||
|
||||
|
Hi Frey. I have acterburner installed, but even after setting up a custom key to activate recording nothing happens
So I have to stick with Fraps. It does what I need it yo do, but I'dlike to have tested Afterburner. Cheers, MP
__________________
|
|
#7
|
|||
|
|||
|
Same issue for me. Afterburner does not record. Fraps works just fine, every time,.
|
|
#8
|
|||
|
|||
|
Quote:
I don't know what the problem might be with your setup. Can't think of any setting in FRAPS or Cliffs Of Dover that might cause that. |
|
#9
|
||||
|
||||
|
FRAPS has always worked well on my system, including this latest 3.5.9 version, with one exception: it won't recognize any of my HOTAS' Directx joystick/throttle/CH Quadrant buttons. Keyboard commands -- no problem.
Since it's important to keep your eye on the target and not look away for a keyboard key (which is the main point of a HOTAS system), I'm puzzled why FRAPS fails to recognize joystick buttons (as TrackIR and Teamspeak do). If I use Thrustmaster TARGET software to emulate a keyboard, then FRAPS does work. This is a kludgy workaround for the sake of one key command, however. I have sent an enquiry to FRAPS about this. However, I had done the same two years ago and their reply was that no one else had ever asked this question before, and were puzzled why anyone would want to use a joystick button in the first place. I'll see if I get a more enlightened reply this time.
__________________
|
|
#10
|
||||
|
||||
|
I can see why no one has asked before if they use only a couple of funtions normally...myself, I don't use the fraps functions enough in game to need them attached to my hotas. So I only use the two lower right side keyboard keys, very easy to locate by feel alone.
__________________
GigaByteBoard...64bit...FX 4300 3.8, G. Skill sniper 1866 32GB, EVGA GTX 660 ti 3gb, Raptor 64mb cache, Planar 120Hz 2ms, CH controls, Tir5 Last edited by SlipBall; 01-27-2013 at 10:00 AM. |
![]() |
|
|