Ati 5970 2 gig ?

[MegOhm]

This is a good card, I have the same one..... Try these settings

Changed ProcessAffinityMask to 63 from 14 (";" removed) - 6 core processor - config.ini
Renamed Logo.waw to stop UBI Splash (In parts/core folder)
Changed Render to D3DD_11 from D3DD_10 - config.ini


ATI HD 5970 Card Settings:
AA: Use App Preference (Morphological Filtering unchecked)
AF: 16X
Tessellazation:OFF AMD optimized unchecked
CAT AI: Performance with Enable Surface Format Optimization Checked
MipMap Detail Level: High Quality
Vertical Refresh: OFF - unless app calls for it
AA Mode: Multi-Sample AA
OpenGL: Triple Buffering Checked

In Game Settings
Resolution: 1920X1080 60 HZ
Psuedo Full Screen
Model Detail: High
Buildings Detail: Medium
Land Detail: Medium
Forest: Low
Visual Effects: High
Texture Quality: Original
AA: 4X
Anti Epilepsy: OFF
SSAO: Off
Vert refresh: checked
Damage Decals: High
Buildings Amount: Medium
Land Shading: Low
Grass: On
Shadows: On
Roads: Off

Intel Core i7-980X Extreme(12MB L2 Cache, 3.33GHz), 12GB DDR3 SDRAM,1333MHZ, 6x2GB, ATI Radeon HD5970, ATI 11.3 Driver, Sound Blaster X-Fi Titanium, 2TB Serial ATA 2 Hard Drive 7200 RPM, Windows 7 Home Premium, 64bit, 52" Panasonic Plasma, Logitech G930 wireless Surround Sound Headset, TrackIR5/Proclip

[naz]

Originally Posted by MegOhm

This is a good card, I have the same one..... Try these settings

Changed ProcessAffinityMask to 63 from 14 (";" removed) - 6 core processor - config.ini
Renamed Logo.waw to stop UBI Splash (In parts/core folder)
Changed Render to D3DD_11 from D3DD_10 - config.ini

If you have a quad+ core I believe you should not be manually setting the process afinity mask setting in the config file:

Quote from Luthier: "We did unload a bunch more stuff into other cores already though. It will obviously only lead to performance improvement if you have more than two cores, and if you haven't manually set your processaffinity in the conf.ini."

http://forum.1cpublishing.eu/showthr...=23002&page=41 post 401

[Kankkis]

Robin, don't sell your 5970 card, it's a really good card, what we need is good crossfire profile from ATI, or good crossfire suppord from devs.

There is only 1 card from ATI what is faster than yours, it's 6990 and it's crossfire card too, so same problems with CoD, if you buy one GPU card you downgrade your computer.

all 5970 is downclocked from factory, so i overclocked mine and get about 25% faster 5970 than default, of course i cannot say overclock it, that is risky but i put link to you, i do it and my card is very fast at moment and stable with factoryfan.
i raised my voltage only 1 notch as you see at the link, only software i use was MSI Afterburner, and i overclock only when there is need to it (A-10 and CoD)

http://www.guru3d.com/article/overcl...on-5970-guide/

Kankkis

[Robin2k7]

[QUOTE=MegOhm;287876]This is a good card, I have the same one..... Try these settings

Changed ProcessAffinityMask to 63 from 14 (";" removed) - 6 core processor - config.ini
Renamed Logo.waw to stop UBI Splash (In parts/core folder)
Changed Render to D3DD_11 from D3DD_10 - config.ini


when i change render to 11 the ground looks blurry ...i am not very good with this is it the config file in your documents ore is it in the steam directory and
fore some reason i cant find ProcessAffinityMask in my conf file .

with the old patch i saw them but right now its gone .