Logitech g940 issues

[baksie]

Make sure you do not have your axes assign to different functions. Looks like you did.

[klingklang]

Can you tell me how this has happened and more importantly how I resolve.
Thanks for your help

Gary

[bongodriver]

Originally Posted by klingklang

Can you tell me how this has happened and more importantly how I resolve.
Thanks for your help

Gary

Do you mean you can't actually set up the axis assignments in the controls editor?

I have a g940 and have no problems, sometimes if the initial axis assignments arent made then alot of games seem to just assign default values to whatever axis it thinks logical, so i've seen the throttle controlling pitch and roll etc, but this is all solved by setting up in the control setup menu.

[Kankkis]

Check your sensitive settings in CoD, i got 940 too and when i first time loaded game they was really bad(allmost min/full movement only when moved joystick a very little), so check deadzone and linearity in game, when flying check that ailerons is moving smoothly when you use them.

Kankkis

[B_Bogus]

I've had no problems with the flight controls, although I did have an issue with throttle - that was down to one of the twin engine throttles somehow being reversed, with the result that when flying single-engine the throttles were in conflict and became a binary switch.
This sounds a bit like what you're describing, perhaps?
Anyway, resolving the conflict sorted it out, so perhaps you've got two controls trying to drive the ailerons?
I think (it's a week ago, so not sure anymore!) that I assigned all the controls after I noticed it saw Joysticks 1 and 2 in the control panel, and when I assigned the axes some did change from 2 to 1.