Anyone tried more than 3 controllers?

[Sokol1]

Originally Posted by 123-Wulf-123

Surely the Spit/Hurri brakes were on the joystick?

Not on the pedals?

Yes, brake on the stick - the "bicicle lever":



Even in post war many British jets use brakes in stick handle.

This remont to WWI when they realise that one pilot hit in one leg are able to land if their feets are strap on rudder bar, and have brakes in handle.

Sokol1

[tf_neuro]

4 controllers here: works fine.

CH Fighterstick
CH Pro Pedals
CH Throttle Quadrant
+ the Throttle off an old x52

Not using any special software, just plugged everything in.


As for the throttle problem

I have one an dit works with only one problem, the slider that I use for throttle goes from 0 to full using only the first +/- 30% of the slider.

-Go to the controls settings interface, axes tab
-Select throttle.
-At the bottom of the page, you will see 5 sliders (left side) and 2 indicators (right side)
-On the right side, the 'in' is your throttle movement, 'out' is what the game does.
-Now, on the left side, set the five sliders like this (top to bottom)
slider#1 = 0.02
slider#2 = 0.00
slider#3 = 1.00 <= All the way to the right
slider#4 = 0.00
slider#5 = 0.02

- This will give you a small dead zone at both ends just to make sure that the output (i.e. 'what the game does') actually goes all the way down to 0 and up to 110 (this is set in the first and last sliders), and the slider#3 at 1.00 sets the in-game throttle to follow your controller throttle instead of jumping up abruptly.

Hope that helps.

PS: use as guidelines, not as ...'gospel'

[CharveL]

Anyone know how to get the CH throttle microstick recognized or a "shift" button? It would be nice not to have to use the controller software each time to play like I did with il2 to get full functionality.