wondering about controler logic (G.50/Hurricane)

[JG53Frankyboy]

true, but you cant set the controls plane for plane...
i ment in general, if i push any axis/slider of my gamecontroler forward i also want to have the specefic engine setting also "moves" forward . Totaly independent how the 3D cockpit lever behaves.
and "rich" misxture is in my understanding 'more' mixture than "lean"

[bando]

Originally Posted by JG53Frankyboy

true, but you cant set the controls plane for plane...

Isn't it so that one can save a profile under a name (Spitfire for instance) and make mmore profiles, so each plane can have it's own setup. After deciding what plane to fly, you load the right profile and off you go.

[JG53Frankyboy]

you have the game ?

[bando]

That sounds sarcastic.

Yes I have th game and each plane got it's own profile thank you very much.

Was just trying to help out

[tf_neuro]

I read this thread and thought maybe this is why I cant start up the g50, I was using the throttles the wrong way.
Tested the Hurricane, then G50, and noticed that the small-throttle-thingy on the left side of the screen always goes back to idle after a failed startup, and in both cases idle was on the bottom.