Adjusting FOV incrementally

[Buchon]

I did try, and it seems me work ... just placebo.

You are right, that are fixed values names.

Sorry for the misunderstood.

I started a thread for edit FOV and Offset values :

http://forum.1cpublishing.eu/showthread.php?t=20560

[DayGlow]

I'd love to be able to map fov to an axis to have smooth zoom in and out. I run an eyefinity setup and every time I start im pressed against the gunsight and have to use the key+mouse to pull back. Much easier to just flick a rotary on my hotas to the proper fov level.

[Luffe]

You can use JoyToKey to get incremental FOV/Zoom in CoD:

http://www.electracode.com/4/joy2key...%20Version.htm

First set up the buttons you want to use to change FOV in JoyToKey.
Set up one for 'Mouse up' and one for 'Mouse down'.

Launch CoD and go to controls and assign each of the two buttons to their own instance of 'Hold to Adjust FOV'. Voilá.

Same procedure to set up an axis, but you will have to assign a key or button to hold down while moving the axis.

[cmirko]

Originally Posted by Luffe

You can use JoyToKey to get incremental FOV/Zoom in CoD:

http://www.electracode.com/4/joy2key...%20Version.htm

First set up the buttons you want to use to change FOV in JoyToKey.
Set up one for 'Mouse up' and one for 'Mouse down'.

Launch CoD and go to controls and assign each of the two buttons to their own instance of 'Hold to Adjust FOV'. Voilá.

Same procedure to set up an axis, but you will have to assign a key or button to hold down while moving the axis.

can you please make screenshots of these settings ? I've tried yesterday to follow your advice but couldn't make it work......

both from joy2key and control settings screen please....

cheers