is the 'anthropomorphic filter' bugged ?

[Wurschtie]

I own a saitek x-52, and my experience is that some of the sliders sometimes are stuck between two values and jumping constantly. In that case, the antro filter thinks you are working a control, and blocks one hand ...

I am pretty sure that one of your axes is jumping ...

[JG53Frankyboy]

Originally Posted by Wurschtie

I own a saitek x-52, and my experience is that some of the sliders sometimes are stuck between two values and jumping constantly. In that case, the antro filter thinks you are working a control, and blocks one hand ...

I am pretty sure that one of your axes is jumping ...

true, i had first the Radiator control on an axis (used the 'throttle' of my M$FFB2). It took me ~3hours till i recogniced that this dont work, at least in a 109 because the game is thinking , if the axis is not EXACTLY in the middlepostion, the pilot has its hand constantly on the crank (right side in the cockpit). In the Spitfire there was no proplem looks like it has a different radiator control (no crank )
But i put the radiator on buttons after that.

i had still a lot of proplems...

but true, i will check my pitch control and elevator control that a still on my X52PRO throttle wheels if i get a HOTS failure when the wheels are not exactly in the middle setting.
BUT, if that is the case, the use of axis, sliders with "two hand limit" at least in the 109 is VERY limited and have to be overworked by the developers IMHO !!