G940 bugs sorted out???

[ACE-OF-ACES]

Originally Posted by mazex

OK, It may be that haven't used it that much then? Since I bought it 1.5 years ago I guess I don't have more than 20-30 flight hours on it... Kids, wife, work and those darn friends stop my rightfully deserved sim time all the time

That or you just one of the lucky ones.. One thing you should do is bring up the calibration routine like pupo162 did in his video of the throttle where he was showing the R1 & R2 noise when moving the RHS throttle (on page 2) than do the same for your rudder and than move them and watch for the spike.. It is visable on mine.. If nothing more than a data point.. than check it again in a month or so and see if you notice it getting worse with time

[mazex]

Originally Posted by ACE-OF-ACES

That or you just one of the lucky ones.. One thing you should do is bring up the calibration routine like pupo162 did in his video of the throttle where he was showing the R1 & R2 noise when moving the RHS throttle (on page 2) than do the same for your rudder and than move them and watch for the spike.. It is visable on mine.. If nothing more than a data point.. than check it again in a month or so and see if you notice it getting worse with time

Yes, many posts so I guess you did not read mine saying that my 1.5 year old set had bad spikes on R1 and R2 like pupo162:s when moving the right stick. Noticed it as 4.10 brought the axis for radiator which I assigned to R1 that I hadn't used yet and thats when I got confused. Had not used R1 and R2 before so I don't know if the error was there from start I got my replacement last week and it has no problems on any axis (have tried the pedals for a long time in the windows setup dialog, fast or slow but they move like on rails in the calibrate dialog - which goes for the throttle to - nice steady axis with no spikes at all). Maybe they have fixed it as this set is brand new? I cannot find any manufacture date on it - anyone knows it there are different hardware revisions and how to see that?

EDIT: My old set had the P/N 842-000002 - and the new one has 842-000004. Could that indicate some change? What do you guys have?

A note to any new G940 users that may read this. DO NOT forget to calibrate the throttle and joystick in the windows device dialog like we did in the old days. The throttle axis, R1,R2, the three trim wheels and the mini stick NEED calibration or otherwise they will not work good and act weird. This is especially noticeable on the throttle axis!

[Slick Fork]

Originally Posted by mazex

Yes, many posts so I guess you did not read mine saying that my 1.5 year old set had bad spikes on R1 and R2 like pupo162:s when moving the right stick. Noticed it as 4.10 brought the axis for radiator which I assigned to R1 that I hadn't used yet and thats when I got confused. Had not used R1 and R2 before so I don't know if the error was there from start I got my replacement last week and it has no problems on any axis (have tried the pedals for a long time in the windows setup dialog, fast or slow but they move like on rails in the calibrate dialog - which goes for the throttle to - nice steady axis with no spikes at all). Maybe they have fixed it as this set is brand new? I cannot find any manufacture date on it - anyone knows it there are different hardware revisions and how to see that?

EDIT: My old set had the P/N 842-000002 - and the new one has 842-000004. Could that indicate some change? What do you guys have?

A note to any new G940 users that may read this. DO NOT forget to calibrate the throttle and joystick in the windows device dialog like we did in the old days. The throttle axis, R1,R2, the three trim wheels and the mini stick NEED calibration or otherwise they will not work good and act weird. This is especially noticeable on the throttle axis!

Has the "new" stick still been behaving properly? I have been considering one of these and am hoping that Logitech will fix the wiring that's causing the rotary spiking