![]() |
|
#1
|
|||
|
|||
![]()
Just use the global setup
![]() |
#2
|
|||
|
|||
![]()
"Override any application setting" is the key.
If you chose "enhance application setting" or any other option, FSAA won't be activated ingame. |
#3
|
|||
|
|||
![]()
Ok guys, I´ve turned off (to global) any setting in the Il-menu and set the global AA to override any app. and 8xQ mode. Still no luck...
![]() |
#4
|
|||
|
|||
![]()
Are you running a fresh installation or did you upgrade your drivers at any point?
If you didn't clean your registry from remains of previous driver-settings, it's possible that you will not be able to actually save your changes (even though it may look like it). I recommend nHancer. You can download this tool for free and once installed you can override any setting, no matter if there is a conflict with older driver-settings or not. You can also fine-tune some options with quick access. |
#5
|
|||
|
|||
![]()
I recommend you don't install any 3rd party NV tools at the moment
![]() These can cause more problems especially if there's a driver fault. Post your IL2 1946 v409m conf. file contents here please . Meanwhile download the latest NV driver and also Driver Sweeper http://www.guru3d.com/category/driversweeper/ Use as per instructions and clean the driver up. Install latest or preferred driver, then pop back here ![]() Last edited by KG26_Alpha; 05-04-2010 at 03:50 PM. |
#6
|
|||
|
|||
![]()
Thanx for your input guys... The thing is, I´m a VERY frequent user of FS9, which is VERY sensitive to Nvidia driver updates.
I´d rather not update the drivers at the moment, since I´ve had tons of trouble with FS9 every time I´ve tried that... Current driver is 182.50 I´ve also tried to override stuff with Nhancer, but no luck there either.. Here´s the config.. Quote:
|
#7
|
|||
|
|||
![]()
Good idea to make a new account for this post.
|
![]() |
|
|