|
|
|
|
#1
09-29-2009, 10:34 AM
|
|||
|
|||
What Cat driver are you using ?
There's a known problem with the latest ones and OpenGL. http://forum.1cpublishing.eu/showthread.php?t=9067 Last edited by KG26_Alpha; 09-29-2009 at 10:38 AM. 
|
|
#3
09-29-2009, 12:35 PM
|
|||
|
|||
|
More information is needed.
Dxdiag Any recent driver or hardware changes what OS are you using Game version, are you using MOds etc etc. Last edited by KG26_Alpha; 09-29-2009 at 12:38 PM.
|
|
#4
09-29-2009, 12:55 PM
|
|||
|
|||
|
ok - OS.....Windows XP
last 6 month no hardware changes,no drivers changes IL2 1946 v4.09mod AAA UI v1.1 + bunch of mods.My configuration was functionally , I played about ten campaigns (modded and unmodded) in various stages no problem,after 4 hours of playing I switched campaign from VVS to USAAF and crash.Started again change another campaign and crash.Sometimes I can play 2-3 missions in row and than crash sometimes crash immediately when load first.
|
|
#5
09-29-2009, 02:15 PM
|
|||
|
|||
|
To start with a few basic checks.
Power supply is ok and all leads are fitted tightly ? Is the graphics card overheating ? Has the casing adequate cooling, all fans are running ok ? Check the ram modules are seated correctly and dust free. If all's ok Quote:
Patch to v408m ONLY Run the sim and see if its stable, if it is then start from there to find what's causing the problem by adding your mods etc one at a time. Dont forget some MODS are graphics intensive, your GPU isn't really up to running IL21946 with anything but mid to low settings. Just to state that mods are not supported at this site refer to the site you got your MODS from, you may find this thread deleted by the moderator/s Last edited by KG26_Alpha; 09-29-2009 at 02:23 PM.
|
|
#7
10-01-2009, 08:17 PM
|
|||
|
|||
|
Il2. exe Crash
Have you just installed any new mods?? if so that could be your problem. Make sure that your install has the correct "Buttons" file, if it hasn't, the start up will crash at about 60%. load
|
 |
|
|
Hybrid Mode
