IL-2 Joystick curve

swiss · #1 10-12-2010, 11:03 AM

Quote:

Originally Posted by Herra Tohtori

I am using the standard version of Saitek X-52. The non-pro version does not offer adjustable input curves, and the default curve produced by the joystick is actually non-linear but exponential for pitch and yaw - a design feature that I can not really understand.

Interesting post, since I got the same stick.
Q:
- curves: Well, can't we use the pro software then?
- non linear: How do you know?

Quote:

Code:

[rts_joystick]
1X=0 133 148 146 144 133 123 115 109 104 100 0
1Y=0 133 148 146 144 133 123 115 109 104 100 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0
1RY=0 100 100 100 100 100 100 100 100 100 100 0
1RZ=0 10 20 30 40 50 60 70 80 90 100 0
1U=0 100 100 100 100 100 100 100 100 100 100 0
1V=0 100 100 100 100 100 100 100 100 100 100 0
FF=0

will try thx.

Quote:

As you can see, I manually entered these values into conf.ini, because the in-game interface didn't accept values larger than 100.

It does, you have to check the ">100" box.

Herra Tohtori · #2 10-14-2010, 02:49 PM

Quote:

Originally Posted by swiss

Interesting post, since I got the same stick.
Q:
- curves: Well, can't we use the pro software then?

Can we? I don't know. If you know of a way to do so, please tell!

Quote:

- non linear: How do you know?

I can see it in the cursor's movement on Game Controllers (from Control Panel). When I move the stick from one side to another slowly at constant rate, the cursor moves first fast toward the centre, then slowly around the centre, then fast to the other side.

Quote:

[about the in-game input config window not allowing values over hundred]

It does, you have to check the ">100" box.

Where is that box? I've never seen that...

swiss · #3 10-14-2010, 02:59 PM

And the software: I just checked - the Pro uses the same software as the non-Pro - it's the SAME stick.

Quote:

1. Tri-state LEDs (which are also accessible by the SDK)
2. Dual spring centering mechanism - provides incremental stiffness as you move the stick away from centre
3. Dual hall effect sensors for increased accuracy of the stick axes
4. Metal shaft and centering mechanism for increased durability
5. Selected metal parts
__________________
Best Regards
Richard Neville
PC Gaming Category Manager
Saitek UK

[/quote]

As far as I can see there is no way to adjust leverage or whatever it is called.
You got any sources?