Maybe one of the TD members can chime in on this. I'm not sure if this is a bug or intended programming.
I wanted to Taxi an AI plane to a particular waypoint and then use the Delay setting to have it sit there for a set time before moving on to the next waypoint. In the screenshot, you can see that I have set a Delay of 2 minutes for the second waypoint. I also set the same Delay for the third waypoint.
However, the waypoint Delay setting for a taxiing plane seems to have no effect. Once a plane started rolling, it ignored the Delay setting at all subsequent waypoints.
So if it's not a bug, I was wondering why the Delay setting would be there if it has no function? (I understand the Delay setting in the INITIAL waypoint is there to command the plane/flight to start it's engine(s) and begin to taxi.)
Aviar
__________________
Intel i7-4790 4-Core @3.60GHz
Asus Z97-C Motherboard
16GB DDR-3 1600 SDRAM @800 MHz
NVIDIA GTX 760 - 2GB
Creative SB ZX SBX
Logitech X-530 5.1 Speakers
27" AOC LED - 2752
Logitech G15 Gaming Keyboard
CH FighterStick-Pro Throttle-Pro Pedals
Logitech G13 Gameboard
GoFlight GF-T8 Module
WIN 8.1
Last edited by Aviar; 08-03-2013 at 05:56 PM.
|