Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik: Cliffs of Dover

IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games.

Reply
 
Thread Tools Display Modes
  #241  
Old 05-25-2011, 09:15 PM
Winger Winger is offline
Approved Member
 
Join Date: Jul 2010
Posts: 543
Default

Quote:
Originally Posted by Phantom77 View Post
I agree with you to some extent but the 109 is still playable for me. I map the propeller pitch on a axis on my saitek quadrant ( lever down decrease pitch and lever up pitch increase and at middle of the axis well neutral ( not like the cockpit animation ). I hope that the Dev team will soon correct it like it was meant to be in a more realistic way just like the real thing. !
I have that too. Its not the way HOW to control the pitch. Its the speed the pitch changes with. Not acceptable like that.

Winger
Reply With Quote
  #242  
Old 05-25-2011, 09:20 PM
Phantom77 Phantom77 is offline
Approved Member
 
Join Date: Apr 2011
Location: St-Roch de l'achigan , Québec , Canada
Posts: 24
Default

Quote:
Originally Posted by Winger View Post
I have that too. Its not the way HOW to control the pitch. Its the speed the pitch changes with. Not acceptable like that.

Winger
Well that was the extent I was agreeing with loll ! Like it should be !
Reply With Quote
  #243  
Old 05-25-2011, 09:30 PM
Winger Winger is offline
Approved Member
 
Join Date: Jul 2010
Posts: 543
Default

Quote:
Originally Posted by Phantom77 View Post
Well that was the extent I was agreeing with loll ! Like it should be !
I agree. Its playable. But its no able to compete... and therefor not acceptable.

Winger

Last edited by Winger; 05-25-2011 at 09:32 PM.
Reply With Quote
  #244  
Old 05-26-2011, 02:21 AM
dflion dflion is offline
Approved Member
 
Join Date: Nov 2007
Posts: 319
Question A discovery with my ATI HD4870x2 GPU Catalyst control centre

I have been trying everything to retain the FPS at a high rate in COD (60-90FPS). Suddenly it drops away to 25-30FPS (or lower), the sound goes and I can't get it back to the higher rate above.

I have just noticed in the ATI Catalyst control centre that my 3D settings had defaulted back to the original settings. As soon as I put my custom settings back in again and flew some missions in COD, I was back up to 60-90FPS.

There appears to be something in the patch 1.01.14588 (I think?) that after you fly a few missions, your 3D settings in the ATI Catalyst control centre somehow default back to the original settings.

I would be interested if other ATI GPU members who are getting sudden FPS reductions, after checking their Catayst control center, have found the same problem?

DFLion
Reply With Quote
  #245  
Old 05-26-2011, 02:22 AM
Orpheus Orpheus is offline
Approved Member
 
Join Date: Mar 2011
Posts: 235
Default

Try and keep the reports relevant guys, we know about the 109 prop already.

I'm getting the 'CPU low - deactivate Aero?' dialogue an awful lot post patch, only happened once or twice before, with frequent drops to desktop for a second or two when accessing the Esc menu in flight. I've also just had my sound drop out on me completely (single player) for the first time ever. Still concerned about this gradual performance degradation, need more info tho.

Last edited by Orpheus; 05-26-2011 at 04:19 AM.
Reply With Quote
  #246  
Old 05-26-2011, 02:24 AM
Orpheus Orpheus is offline
Approved Member
 
Join Date: Mar 2011
Posts: 235
Default

Quote:
Originally Posted by dflion View Post
I have been trying everything to retain the FPS at a high rate in COD (60-90FPS). Suddenly it drops away to 25-30FPS (or lower), the sound goes and I can't get it back to the higher rate above.

I have just noticed in the ATI Catalyst control centre that my 3D settings had defaulted back to the original settings. As soon as I put my custom settings back in again and flew some missions in COD, I was back up to 60-90FPS.

There appears to be something in the patch 1.01.14588 (I think?) that after you fly a few missions, your 3D settings in the ATI Catalyst control centre somehow default back to the original settings.

I would be interested if other ATI GPU members who are getting sudden FPS reductions, after checking their Catayst control center, have found the same problem?

DFLion

Bear in mind that if you installed Cat 11.5 as directed before getting the patch, it will reset your Catalyst to default settings upon install (I made that mistake, was trying to run xfire for a full 10 mins before I realised! )?

Does sound like you might have this performance degradation too. Ignoring the reset catalyst settings for now, do you see a performance drop over time (say, running three or four missions over different areas) or from initial loadup/first flight?
Reply With Quote
  #247  
Old 05-26-2011, 03:08 AM
dflion dflion is offline
Approved Member
 
Join Date: Nov 2007
Posts: 319
Default Catalyst problems?

Quote:
Originally Posted by Orpheus View Post
Bear in mind that if you installed Cat 11.5 as directed before getting the patch, it will reset your Catalyst to default settings upon install (I made that mistake, was trying to run xfire for a full 10 mins before I realised! )?

Does sound like you might have this performance degradation too. Ignoring the reset catalyst settings for now, do you see a performance drop over time (say, running three or four missions over different areas) or from initial loadup/first flight?
Thanks Orpheus, I certainly have a performance degradation similar to you. I did upgrade my ATI drivers before the new patch, though several times since then I have 'tweaked' my 3D settings to get the best performance. The performance definately drops over time - up to five missions. Until now I never thought to look at my Catalyst control centre - and there it was, a default back to the original settings. I will do some more tests to see when this 'default back' is occuring and post some more info.

DFLion
Reply With Quote
  #248  
Old 05-26-2011, 04:16 AM
Orpheus Orpheus is offline
Approved Member
 
Join Date: Mar 2011
Posts: 235
Default

Quote:
Originally Posted by dflion View Post
Thanks Orpheus, I certainly have a performance degradation similar to you. I did upgrade my ATI drivers before the new patch, though several times since then I have 'tweaked' my 3D settings to get the best performance. The performance definately drops over time - up to five missions. Until now I never thought to look at my Catalyst control centre - and there it was, a default back to the original settings. I will do some more tests to see when this 'default back' is occuring and post some more info.

DFLion
Ah right ok then, I've done the same. I've just checked and my Cat settings have remained the same so definitely not seeing that on my system, sorry!

Up to five missions sounds about right. I found that if I stayed on the same mission the drop was far less noticeable (slight stutter creeps in around the third playthrough sometimes, but not immediately present), but if I move about between quick missions the performance gets steadily worse after the third or fourth, dropping in fps/general performance by around 50%.

I don't get it when I play campaign either, which coupled with the fact the degradation is far less present when repeating several attempts at a single mission, leads me to suspect it might be a terrain loading issue. Staying in the same general 'mission area' seems to prevent the degradation or at least mitigate it - if you load several mission areas you start to see a hit.

Be nice to to hear from anyone who may be having similar trouble so we can compare reports.
Reply With Quote
  #249  
Old 05-26-2011, 04:23 AM
Kankkis Kankkis is offline
Approved Member
 
Join Date: Mar 2011
Location: Turku, Finland
Posts: 584
Default

Quote:
Originally Posted by Orpheus View Post
Ah right ok then, I've done the same. I've just checked and my Cat settings have remained the same so definitely not seeing that on my system, sorry!

Up to five missions sounds about right. I found that if I stayed on the same mission the drop was far less noticeable (slight stutter creeps in around the third playthrough sometimes, but not immediately present), but if I move about between quick missions the performance gets steadily worse after the third or fourth, dropping in fps/general performance by around 50%.

I don't get it when I play campaign either, which coupled with the fact the degradation is far less present when repeating several attempts at a single mission, leads me to suspect it might be a terrain loading issue. Staying in the same general 'mission area' seems to prevent the degradation or at least mitigate it - if you load several mission areas you start to see a hit.

Be nice to to hear from anyone who may be having similar trouble so we can compare reports.
I i mentioned earlier i got the same problem, first go to crosscountry, steady 60FPS, then london and back to crosscountry i got 30-40FPS.
What is strange i got this problem only in crosscountry only too. Sometimes i go first Crosscountry and get steady 60FPS and maybe next time when i start to play go straight to Crosscountry first and get 30-40FPS.

Checked with fraps, and i see that difference with my eyes too, when i got 30-40FPS there is little warping on lowlevel flying, i mean all details is jumping a little, when steady 60FPS no jumping on trees and other details at all, very smooth then

Last edited by Kankkis; 05-26-2011 at 04:27 AM.
Reply With Quote
  #250  
Old 05-26-2011, 04:40 AM
Wolf_Rider Wolf_Rider is offline
Approved Member
 
Join Date: Dec 2007
Location: Sydney, Australia
Posts: 1,677
Default

500 ~ 700 ft seems to be the level to keep above for smoother flying

yes, something is awry in the memory side of things regarding retention and loading between missions
__________________
Intel 980x | eVGA X58 FTW | Intel 180Gb 520 SSD x 2 | eVGA GTX 580 | Corsair Vengeance 1600 x 12Gb | Windows 7 Ultimate (SP1) 64 bit | Corsair 550D | Corsair HX 1000 PSU | Eaton 1500va UPS | Warthog HOTAS w/- Saitek rudders | Samsung PX2370 Monitor | Deathadder 3500 mouse | MS X6 Keyboard | TIR4

Stand alone Collector's Edition
DCS Series



Even duct tape can't fix stupid... but it can muffle the sound.

Last edited by Wolf_Rider; 05-26-2011 at 04:43 AM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:25 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.