Control Devices & Wheel Issues - Page 10

USA Trucker · #1 11-28-2010, 12:01 AM

Hello, and welcome to the forum.

Please look at the stickies before you post. Your first question belongs here. The second question/concern you had should be posted in the "Frame-rate Issues" or "Other Problems". So go ahead, and repost it in one of those threads. In the future please don't create a thread where one already exist, and don't post two questions unraleted to each topic in the same post. Seperate your post questions in the appropriate threads. This makes it easier for others to find, and run a search.

kennyb87 · #2 11-28-2010, 12:24 AM

Are you enabling the wheel in setup?

Kibble · #3 12-12-2010, 10:59 AM

Quote:

Originally Posted by Krazy

Hey,
After a long time trying to fix that problem (and even taking a break from RNR because of this) i come back here to see if someone can help me.
the problem is that neutral gear is not working (it's suppose to go to "neutral" if i don't select any speed but in my case, it's staying in the last gear engaged (so if i'm using 2nd , i stop the truck, put the gearbox on neutral, it's staying in the 2nd)

Is it normal? if not, somebody with a g27 can explain how they avoid this problem?
Thanks in advance to anybody

i have a G25. you must use the clutch to go back in neutral.

i have a small, remedy for the very jerky steering:

i put the sensitivaty to 1. i have a logitech G25, and i can steer better.
this will take a long time to get used to, but is more realistic.(imo)

Donaughy · #4 12-04-2011, 08:08 PM

Hello Everybody, This is my First Post and question in this forum

I have Rig n roll installed and everything was working well... but when i was playing the game i found that the direction of the truck in the game turns right no matter what i do, i must constantly turning left because if i stop giving direction my truck turns to the right and crash

i checked the sensivity controls option and nothing happend.
Sorry for my poor english and i hope someone could help me playing this Great game!

USA Trucker · #5 12-05-2011, 03:59 AM

Hello & welcome to the forum.

What are you using as a steering device?

Donaughy · #6 12-06-2011, 10:34 PM

Im using The Keyboard, i have an Xbox 360 Controller...but the keys for this are too many so i stick with the Keyboard

Is there a solution to this problem? how can i fix it?

Thanks in advance

USA Trucker · #7 12-07-2011, 10:09 AM

Many people have had this problem. Make sure all control divices (such as Xbox 360) are DISCONNECTED from the computer (except the mouse). In the game menu, go to settings then controls, and make sure you are in Keyboard Mode, then varify that steer left is left arrow & steer right is right arrow. Your problem should be solved.

andypandy1996 · #8 04-27-2012, 10:48 PM

Ok so I've had this game for a while. I have a wheel and i have hooked it up but whenever i try to drive it throws the wheels hard over instead of turning smoothly. I've calibrated the wheel several times but i don't know what the problem is. Can anyone help?

PistonPusher · #9 05-04-2012, 04:35 AM

Hi:
I'm new here and just came across this forum while looking for a manual/instruction sheet that could give me the key set for a wheel and pedal set for Rig&Roll. I've only spent a little bit of time with the game. I have played several of the 18 WoS series games and I have to agree that half the fun of a truck sim game (at least for me) is hooking/unhooking and jocking around the trailers. I really prefer runnin' doubles. There was a time when I actually went on a forum and asked for the secret to back in to unload a set of doubles. I got a simple answer......Practice!

Anyway, I just wanted to say that as a newbie to R&R, the game is completely overwhelming. Can't say much else since I have a long way to go with it. That is if I ever do get halfway good at it.

I do have a simplified question about setting up Rig&Roll. Do I have to switch to the Wheel and Pedal format every time I want to program a function into a key of the Wheel and Pedal format as opposed to programming the keyboard?

Any enlightenment into this enjoyable pastime would really be appreciated.

USA Trucker · #10 05-04-2012, 04:57 AM

Hello & welcome to the forum.

Just like the last guy, we need to know what your Wheel Device is. We can’t assume that everyone has the same. We need the Brand Name, and Model of your device. Such as mine is a Logitech G25. Please help us to help you. I can’t count how many times you guys leave this important info out

You won’t find double trailers in this game. Hooking up a trailer is the downside of this game. It’s just not in the cards. Your last question depends on the first one.