|
|
|
|
#1
06-19-2015, 10:50 AM
|
|||
|
|||
I can't help, but I wanted to add something that may be related. I was using CH quadrant (6 levers) to taxi, then switching to a CH single throttle to fly. It was amazingly trouble free. But, after a while, I could not change engine 3 with the quadrant. But, If I selected that engine, the single throttle controlled it just fine. Maybe the game does confuse controllers when it gets a bit complex.
|
|
#2
09-23-2015, 03:38 AM
|
||||
|
||||
|
the game doesn't recognize more than 4 or 5 controllers or inputs.
__________________
71st Eagle Squadron www.anon6.com - Blogger on DCS Series 71st Mastiff's You-Tube " any failure you meet is never a defeat; merely a set up for a greater come back " Asus||i7x5930k||16gb3200||GTX10808gb||ATX1200Corsa ir||CBTitanium7.1||Win10x64||TrackIr4Pro/ir||gladiator pro mkII||siatekpedals||X52Throttle||G15Keyboard/RazerMouse|| 32"LCD||2x7" lilliputs,1x9inc
|
|
#3
09-23-2015, 05:31 AM
|
||||
|
||||
|
Just the first 4 controllers. What the 'first four' controllers are, is a bit of a mistery: I researched and it seems that windows sorts the USB game controllers (hexa)alphabetically by vendor id / product id. I developed YaDeLi to get the axes of controller five, six, et al into the game.
But I am not sure that this is the problem here. Works ok under Windows (test with USB Gamecontroller, properties)? Is recognized in IL-2 (Controllers)? Acts funnily?
__________________
Ceterum censeo the mixture axis should be supported in IL-2 1946' DeviceLink. ------------------------------------------------------------- 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
