Blacksix can you please have a look at the Force feedback profiles

[VO101_Tom]

Hi. I'm not tested this (my G940 FF is editable without problem), but i read somewhere, that the FF files is compatible with old il-2 FF files (at least, the file names is the same). You can download medium and light files for il2-, so -in theory- it should work under clod too (edit - My mate confirmed, it working with CloD too).

You can download from here:
http://www.mission4today.com/index.p...etails&id=3656

and copy to there:
C:\Program Files (x86)\Steam\steamapps\common\il-2 sturmovik cliffs of dover\parts\core\FF

But an important thing: I don't know, the Steam VAC check these files, or not, so until BlackSix or anyone else don't confirm (i'm just asked BlackSix, maybe he know), please use it only offline (you change the system files, the Steam VAC may detect as "cheat" )

[Sokol1]

Try adjust FF effects with FEdit (MS tool), look in this topic:

http://forum.1cpublishing.eu/showthread.php?t=18562

Sokol1

[Anders_And]

Originally Posted by Sokol1

Try adjust FF effects with FEdit (MS tool), look in this topic:

http://forum.1cpublishing.eu/showthread.php?t=18562

Sokol1

PLease read my post again Sokol! I CAN edit the cannon effects to be much lower but theb I at the same time aslo reduce the stall shake! This is the problem!! For some reasln the 109 has the same file for stall and cannon shake...

[Anders_And]

Originally Posted by VO101_Tom

Hi. I'm not tested this (my G940 FF is editable without problem), but i read somewhere, that the FF files is compatible with old il-2 FF files (at least, the file names is the same). You can download medium and light files for il2-, so -in theory- it should work under clod too (edit - My mate confirmed, it working with CloD too).

You can download from here:
http://www.mission4today.com/index.p...etails&id=3656

and copy to there:
C:\Program Files (x86)\Steam\steamapps\common\il-2 sturmovik cliffs of dover\parts\core\FF

But an important thing: I don't know, the Steam VAC check these files, or not, so until BlackSix or anyone else don't confirm (i'm just asked BlackSix, maybe he know), please use it only offline (you change the system files, the Steam VAC may detect as "cheat" )

Thx Tom I will try that... Not sure if it that works tho.. its only for the 109 that this problems exists in CLOD...

[VO101_Tom]

I got response from BlackSix:

"My question, if someone change these files to the il-2 "medium" or "light" files (wich was the solution under il-2), Is the Steam VAC enable this? Or he risk some ban or other VAC punishment?
I don't want to give bad advise to anyone."

Hi, Tom!
I apologize, but it's forbidden to me to make comments or something to tell about work VAC in the game. Formally yes, he risks.

[Anders_And]

Thx Tom!
But the the problem is not the profiles, they can easily be changed to anyones liking. The problem is ONLY for the 109 where the "cannon shake effect file" uses the same file as the stall shake effect". So if I reduce the shake effect for the cannons I also lose the shake effect for the stall! THIS IS THE PROBLEM. Not various profiles...

My question to blacksix was if he could have a look at this issue that only the 109 has. I want to be able to keep my stall effects but at the same time reduce the cannon shake. Just like I can for any other Aircraft in game...

The goofy thing is that only aerodynamic forces should come through the stick, all those other forces should come through the seat ...


ah, well, there you have it ...

[lensman1945]

Originally Posted by zipper

The goofy thing is that only aerodynamic forces should come through the stick, all those other forces should come through the seat ...


ah, well, there you have it ...

..so we need Force Feedback Pants then

[Anders_And]

Originally Posted by lensman1945

..so we need Force Feedback Pants then

What are u talking about?! A stall is very well felt through the flight controls in real life. In this case a stick...

Edit: sorry i meant to quote the post above yours..