ActorByName stupid question

[podvoxx]

Originally Posted by FG28_Kodiak

You mistake is not the actorname, its correct, but you used

(part.ParameterTypes.I_VelocityIAS, -1);

you must use

(part.ParameterTypes.Z_VelocityIAS, -1);

BTW. The simplest way to get the actorname is in game external view, right click -> enable show object names.

Parameters info:
http://www.sukhoi.ru/forum/showthrea...=1#post1896460

/// [Misc.: Machine Spatial Coordinates]
        /// <para>Indicates machine position in world coordinates.</para>
        /// <para>Subtype 0 shows X-coordinate;</para>
        /// <para>Subtype 1 shows Y-coordinate;</para>
        /// <para>Subtype 2 shows Z-coordinate.</para>
        /// </summary>
        Z_Coordinates,
        /// <summary>
        /// [Misc.: Machine Spatial Orientation]
        /// <para>Indicates machine orientation, angles are in degrees.</para>
        /// <para>Subtype 0 shows yaw (0 degrees point E);</para>
        /// <para>Subtype 1 shows pitch (nose-up is negative);</para>
        /// <para>Subtype 2 shows roll (right roll is positive).</para>
        /// </summary>
        Z_Orientation,
        /// <summary>
        /// [Misc.: Machine Overload under Acceleration]
        /// <para>Indicates overload in m/s/s.</para>
        /// <para>Generic subtype (-1) shows accelerometer, being 0 under normal conditions;</para>
        /// <para>Subtype 0 shows acceleraton along machine's X axis;</para>
        /// <para>Subtype 1 shows acceleraton along machine's Y axis;</para>
        /// <para>Subtype 2 shows acceleraton along machine's Z axis.</para>
        /// </summary>
        Z_Overload,
        /// <summary>
        /// [Misc.: Machine Altitude AGL]
        /// <para>Indicates machine elevation above ground level in meters.</para>
        /// </summary>
        Z_AltitudeAGL,
        /// <summary>
        /// [Misc.: Machine Altitude MSL]
        /// <para>Indicates machine elevation above 0.0 Z-plane.</para>
        /// </summary>
        Z_AltitudeMSL,
        /// <summary>
        /// [Misc.: Machine's Velocity in Air]
        /// <para>Indicates machine's aerial velocity.</para>
        /// <para>Generic subtype (-1) shows velocity length;</para>
        /// <para>Subtype 0 shows aerial flow along machine's X-axis;</para>
        /// <para>Subtype 1 shows aerial flow along machine's Y-axis;</para>
        /// <para>Subtype 2 shows aerial flow along machine's Z-axis.</para>
        /// </summary>
        Z_VelocityIAS,
        /// <summary>
        /// [Misc.: Machine's Velocity in World Coordinates]
        /// <para>Indicates machine's absolute velocity.</para>
        /// <para>Generic subtype (-1) shows velocity length;</para>
        /// <para>Subtype 0 shows machine's speed along world's X-coordinate;</para>
        /// <para>Subtype 1 shows machine's speed along world's Y-coordinate;</para>
        /// <para>Subtype 2 shows machine's speed along world's Z-coordinate.</para>
        /// </summary>
        Z_VelocityTAS,
        /// <summary>
        /// [Misc.: Machine's Mach Factor]
        /// <para>Indicates machine's aerial velocity devided by sonic speed.</para>
        /// <para>Generic subtype (-1) shows velocity length;</para>
        /// <para>Subtype 0 shows aerial flow along machine's X-axis;</para>
        /// <para>Subtype 1 shows aerial flow along machine's Y-axis;</para>
        /// <para>Subtype 2 shows aerial flow along machine's Z-axis.</para>
        /// </summary>
        Z_VelocityMach,
        /// <summary>
        /// [Misc.: Ambient Temperature]
        /// <para>Indicates air temperature around machine's location, in K.</para>
        /// </summary>
        Z_AmbientAirTemperature,