Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik: Cliffs of Dover > Technical threads > FM/DM threads

FM/DM threads Everything about FM/DM in CoD

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #23  
Old 07-15-2012, 07:42 PM
MiG-3U MiG-3U is offline
Approved Member
 
Join Date: May 2012
Posts: 55
Default

Quote:
Originally Posted by Crumpp View Post
Why are you regurgitating the same stuff I just posted. Puzzling...
Nothing puzzling there, you just forgot to underline the most relevant part for this thread and I fixed it for you; the bob weigh was added because the CoG had slipped too far aft causing londitudinal instability just like Quill notes.

Quote:
Originally Posted by Crumpp View Post
The fact Supermarine recognized that longitudinal instability and took measures to fix it invalidates any pointy tin foil hat theory the instability did not exist.
Yep, when the CoG slips too far back, instability exist in pretty much every airplane, including Spitfire and Mustang. Bob weighs were used in some models of both fighters exactly for the same reason: CoG shift. Both aircraft were also stable when the CoG was forward enough.

Here is again A&AEE on stability of the early mark Spitfire:

http://www.spitfireperformance.com/k9787-fuel.html

Quote:
(v) Stability - The aircraft is laterally stable at all speeds except in the immediate vicinity of the stall when it is unstable. The aircraft is directionally stable engine 'OFF' and 'ON' at all speeds, but on the climb this is difficult to assess owing to insufficient rudder bias. Longitudinally, the aircraft is stable with centre of gravity forward, but is unstable with centre of gravity normal and aft with engine 'OFF' and 'ON'.
CoG was at 5.8" aft datum line when the airplane was found to be longitudinally stable, that is 2" more forward than Naca tested. Note that Spitfire IX had CoG around 5" aft datum line at service load, no need for bob weigh.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:16 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.