![]() |
|
IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games. |
![]() |
|
Thread Tools | Display Modes |
#191
|
||||
|
||||
![]()
I don't know if any of you have witnessed this,but when you use the Hurricane on 'Quick Missions'/Cross Country there are problems that were'nt there before,I'm sure.
Firstly you'll notice the skin on the aircraft does'nt appear until some time into the mission,mine appeared just as I took off,prior to this you have a grey blank of a skin. Secondly and more importantly,you start off as always in the Cross Country mission on the deck and ready to take off.However there is now a bug where as you enter the mission the engine is allready working and the propeller is going round,well just finishing actually as if you've just switched off. Unless you immidiatley switch on you're rad,the engine will perforate your water rad........this is with the throttle at it's minimum too ![]() I'm not sure what'll happen if you choose any other aircraft for this,but this can't be right,and I'm pretty sure it was ok prior to the patch,please tell me if I'm wrong.
__________________
Alienware Aurora|Win 7 64-bit Home Premium|IC i7-920 Processor (Quad-Core)|14GB DDR3 RAM|1 TB SATA 7200rpm Hard Drive|GIGABYTE GeForce GTX 770 2GB WINDFORCE 3 X fan|Thrustmaster Warthog|Saitek Pro Combat rudder pedals,throttle quadrant and Cessna trim wheel|TrackIR4|Sense of humour,I find it comes in handy! |
#192
|
|||
|
|||
![]()
I totally re-installed COF after having major problems, (now I think not connected to patch) however, with the new patch and core fix, i get the red triangle on start up, the game is running much slower and then crashes after about 1 minute of gameplay, citing 'core.dll' as the issue...
|
#193
|
|||
|
|||
![]()
decided to go back to earlier version, verified files, etc, now core dll issue, and CTD, plan to delete full game and re-install to earlier version.
|
#194
|
|||
|
|||
![]() Quote:
__________________
i5-2500K @3.3GHz / 8GB Corsair Vengeance DDR3-1600 / Asus P8P67 / GTX-260 (216) / WD 500GB Samsung 22" 1680x1050 / Win7 64 Home Premium CH Combat Stick / CH Pro Throttle / Simped Rudder Pedals |
#195
|
|||
|
|||
![]() Quote:
Gonna uninstall and re reinstall with older patch I thinks. Glad somebody else is having this problem anyway! |
#196
|
||||
|
||||
![]()
Or....you can make up your own training flights as I do in FMB,this way I know it'll work.
......I just feel sorry for all the new guys trying to get to grips with this for the first time,it must seem very confusing,and this sort of thing does'nt help at all,I would imagine. However it has to be said,this is after all an Alpha patch and this sort of thing is the norm in Alpha patches,so let's hope it's addressed in the next upgrade.
__________________
Alienware Aurora|Win 7 64-bit Home Premium|IC i7-920 Processor (Quad-Core)|14GB DDR3 RAM|1 TB SATA 7200rpm Hard Drive|GIGABYTE GeForce GTX 770 2GB WINDFORCE 3 X fan|Thrustmaster Warthog|Saitek Pro Combat rudder pedals,throttle quadrant and Cessna trim wheel|TrackIR4|Sense of humour,I find it comes in handy! Last edited by Plt Off JRB Meaker; 05-21-2012 at 11:01 AM. |
#197
|
|||
|
|||
![]()
With the patch you do not need to warm up the engine, this is maybe the effect the dev team was after but the temp of oil and water is at the high end. To counter this open your radiator at max for 5 minutes during take off and fligth until it is (the oil and water temp) normal again. The most annoying is the power/throttel setting in the Spitfire MK Ia and IIa is wrong and is nearly impossible to use.
![]() |
#198
|
||||
|
||||
![]()
Not happy with this patch a lot if CTD's. Propellor effect is overdone and so are the spins, a little move can bring you in a spin and is very hard to recover. No improvement for me.
__________________
Intel i7 970 6x3.2 ASUS Sabertooth X58 ASUS GTX580 Corsair 12GB 1600 Mhz OZC SSD 120GB |
#199
|
|||
|
|||
![]() Quote:
|
#200
|
|||
|
|||
![]()
anyone else having the auto prop pitch not working in the 109e4? Its like it was a few patches ago, have to change to manual, increase, decrease and so on, changing to auto again and its ok.
|
![]() |
Thread Tools | |
Display Modes | |
|
|