Ju-87 rudder not in the center

[_YoYo_]

Originally Posted by 41Sqn_Banks

Because aircraft are trimmed for level flight by default.

How is possible? If I take aircraft on the grond I must take him with trimms for ZERO. Just for operations like take off, climbing, windy weather ect can setup trimms as we want - in the real. For me if You take virtual model must be too same, so you take aircraft with "nul" positions of all trimms.

[VO101_Tom]

Originally Posted by _YoYo_

How is possible? If I take aircraft on the grond I must take him with trimms for ZERO. Just for operations like take off, climbing, windy weather ect can setup trimms as we want - in the real. For me if You take virtual model must be too same, so you take aircraft with "nul" positions of all trimms.

It should be centered, or not, whatewer. It isn't a bug. Set to center before take off, and your problem solved

[_YoYo_]

Originally Posted by VO101_Tom

It should be centered, or not, whatewer. It isn't a bug. Set to center before take off, and your problem solved

Yep - it can be the wish or the feature .

[Artist]

Hi Yoyo,

Originally Posted by _YoYo_

Yep - it can be the wish or the feature .

So what about the issue 235 in the bugtracker? Do you want me to change it to Bug: "Ju 87: Rudder trim not centered at startup"

Artist

[_YoYo_]

Originally Posted by Artist

Hi Yoyo,



So what about the issue 235 in the bugtracker? Do you want me to change it to Bug: "Ju 87: Rudder trim not centered at startup"

Artist

Yes it can be!

But second question - I dont create the new subject - I noticed in Ju-87 than prop pitch lever works in oposit side than in other German aircraft. I don talk about situation when You use mouse for sure, but when prop You have set up on your controller (full engine management). Example : in Emil E-3 take lever of controler for increasing prop, lever in virtual cocpit did too same - forward so its ok. In Stuka, if You do too same lever in VC goes to backward (!) when you take your controller forward. For me its a bug but can any check this? Remeber - manual management.

[VO101_Tom]

Originally Posted by _YoYo_

Yes it can be!

But second question - I dont create the new subject - I noticed in Ju-87 than prop pitch lever works in oposit side than in other German aircraft. I don talk about situation when You use mouse for sure, but when prop You have set up on your controller (full engine management). Example : in Emil E-3 take lever of controler for increasing prop, lever in virtual cocpit did too same - forward so its ok. In Stuka, if You do too same lever in VC goes to backward (!) when you take your controller forward. For me its a bug but can any check this? Remeber - manual management.

The invert PP is already registered on the bugtracker:
http://www.il2bugtracker.com/issues/103

[_YoYo_]

Originally Posted by VO101_Tom

The invert PP is already registered on the bugtracker:
http://www.il2bugtracker.com/issues/103

Voted, Thx!

[Artist]

Hi Yoyo,

Originally Posted by _YoYo_

Yes it can be!

Done.

Artist

[Artist]

Because 4 votes were already cast before the title and description was changed, the issue has been moved to #236: Ju 87: Rudder trim not centered at startup

All who have voted on 235, please do so again on 236.

@_YoYo_: Please update the reference in your first post (236 instead of 235) - but please don't change the text. Otherwise nobody will understand what the discussion was all about

Sorry for the inconvenience.

Artist

[zahnartz62]

My JU 87 rudder is off to the right looking at it from rear view and close up. I am using trim to visually line it up with fuselage. have not flown it for some days so quite surprised to note this and very glad to find others have this observation.