Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik: Cliffs of Dover > Technical threads > Controls threads

Controls threads Everything about controls in CoD

Reply
 
Thread Tools Display Modes
  #1  
Old 03-25-2012, 03:19 PM
el0375 el0375 is offline
Approved Member
 
Join Date: Nov 2009
Posts: 73
Default

my wild guess is that even if you set your boost to a certain level you change the propeller pitch, and as you do it changes how many rotations the propeller can do so it can increase or decrease RPM.
apart that i cant think nothing else, and i have your same joystick
Reply With Quote
  #2  
Old 04-01-2012, 12:05 PM
Nephris Nephris is offline
Approved Member
 
Join Date: Jun 2008
Posts: 117
Default

I notice also several probs with my throttle.
I got a G940 which substituted my old X52 system.
The G940 throttel seemed to stop working , as i wasnt able to move the throttle ingame anymore, also some of the buttons were not work anymore.
I expected it to be a warranty case, as the G940 throttle is well known for problems.
I then plugged my X52 throttle to use with my G940joystick, after a readapting the controlls, i started my first flight, and noticed suddenly the same procedure.
Loss of the throttle control.

Full movements to 100% -> 0% and back, gave the functionality back.
Nevertheless i dont know what happened?
Maybe the USB plug has a failure, maybe i plugged to many USB items into the pc or maybe COD has a prob in certain conditions, although i dont expect that to be the reason.

At the end, the throttle still doesnt work liable, which is more than annoying and i ve still no real clue why.
As i dont expect the game to be the issue this time, I cant hope on the patch this time.
Reply With Quote
  #3  
Old 04-05-2012, 09:49 AM
autodeath autodeath is offline
Registered Member
 
Join Date: Sep 2011
Posts: 2
Default

It migh help to someone...
I use two joysticks, one for axes control and one for throttle control plus pitch control. I noticed that under some conditions my pitch and throttle controls don't work. I figured out that it's caused by my not too clever solution of radiator control mapping (I fly almost exclusively bf108E3). I mapped slider for the control of radiator which expects no more than 3 positions: opening, closing, neutral. Unfortunately slider in the end positions keeps sending signal of opening position even if the controlled element in aircraft is already in it's end position. Which eventually confuses clod, after respawn or even sometimes during flight, which leads to block signals from throttle and pitch mapped controlls to get grabbed and applyed by a simulator. I must set explicitely the slider position on my joystick to some middle position to prevent to keep emiting the signal to the simulator if I want to use it in a described way.
Reply With Quote
  #4  
Old 04-05-2012, 07:44 PM
Nephris Nephris is offline
Approved Member
 
Join Date: Jun 2008
Posts: 117
Default

Good find m8.
Stupid ass me, send my G940 as warranty case back to Logitech....LoL...no awaiting my not broken and fixxed throttle back....
Your description hits my issue very well.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:46 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.