New set of DLLs, from February 27th, 2008

[jurinko]

max settings - switch to perfect mode, select maximum settings in the il2setup.exe, in the conf.ini set the visibility distance to 72km, under OpenGL section set water = 3 (or 2 or 4, depends on GF), set forest = 3.

[IvanK]

Jurinko.

Visibilty set to 73 in Conf.ini. ? do you mean 3 which seems to be the defult with Landgeom=3

[_79_cfb]

I set my visibilty to 73 and it went back to 3

[Deovis]

@ _79_cfb

Watch out!!!

the VisibilityDistance parameter in the conf.ini (opengl) must be set to 3 to have the maximum visibility range of 73km and not to the actual range distance like you did!

So VisibilityDistance=3 corresponds to a visibility range, in the game, of 73km!

[_79_cfb]

~S~
Thanks for clearing that up Devis

[Inadaze]

A bump to keep it on the frontpage

[IceFire]

Well I have so say that these DLLs, minus the full mission builder problem with the damage cities graphics as mentioned before, is otherwise spot on. No visual glitches at all...solves so many problems.