Engine Start??

[aus3620]

No, the "ignition" button on the dashboard does not work. "I" is the default ignition. Try that. Have a look at this webpage, it may help you out.

[badfinger]

Originally Posted by aus3620

No, the "ignition" button on the dashboard does not work. "I" is the default ignition. Try that. Have a look at this webpage, it may help you out.

I know "I" is the right key, but do I assign it to one of an "engine select" or "engine toggle", or something else. Nothing seems to work. This is the strangest thing I have seen so far. One minute "F6 I" was working just fine, and always had, the next I can't start the engine.

What I can't remember is what" F6 I" was assigned to in the options.

binky9

[aus3620]

Hi Binky9,

Now I get it!! Like you I have just discovered that there is no Ignition to set from the menu selections! How odd is that!?

In my 1C SoftClub/il2 sturmovik cliffs of dover directory are all the various control files I have setup for each aircraft. For instance, myHurri. All these are text files so can be edited with Notepad.

I think they all are based on the confUser file.

Search for capital "I".
You should find the line - I=enginei01

If not, edit or insert as appropriate.

No expert on this sort of stuff but give it a go!

[badfinger]

That doesn't appear to have worked. Although, my computing skills are worse than normal.

I found 4 confuser.ini files, and put 'I=enginei01" in each, but no joy.

binky9

[aus3620]

hi binky7,

Four confUser files does not sound right! I'm only guessing so hopefully someone else here with more knowledge will chime in.

In the confUser file is a section: [Hotkey pilot]
quote

[HotKey pilot]
Joystick1+Key1=trigger1
Z=rudder_leftx
X=rudder_rightx
W=thtl_110
Joystick+Key15=airbrake
Control NumPad-9=site_alt_plus
V=landingflaps_d
Shift BackQuote=engselect_all
Control NumPad-8=site_dist_plus
T=thtl_psicutout
Control NumPad-7=site_spd_plus
Control NumPad-6=site_side_right
R=rad_auto
Control NumPad-5=site_auto
Control NumPad-4=site_side_left
Joystick2+Key0=trigger01
Control NumPad-3=site_alt_minus
Joystick+Key0=pitch_plus
Control NumPad-2=site_dist_minus
Control NumPad-1=site_spd_minus
I=enginei01
Joystick+Key14=trigger3
G=uc
Control Z=ruddert_left
F=landingflaps_u
Control X=ruddert_right
Control W=abwurf_arm
B=wheelbrakex
Control T=thtl_slowcutout
Equals=thtl_plus
9=extinguisher
6=rad_plus
5=rad_minus
Control G=uc_down_emer
Shift 8=engselect_n7
Joystick+Key12 Joystick+Key18=autorudder_off
Shift 7=engselect_n6
Shift 6=engselect_n5
Control C=pilot_switch
Shift 5=engselect_n4
Control B=bombbaydoors
Shift 4=engselect_n3
Shift 3=engselect_n2
Shift 2=engselect_n1
Shift 1=engselect_n0
Down=elevator_downx
Right=aileron_rightx
Up=elevator_upx
Left=aileron_leftx
Control 7=rudder_leftx
Joystick+Key12 Joystick+Key17=autorudder_low
Shift Down=elevatort_ndown
Shift Right=aileront_right
Space=trigger0
Shift Up=elevatort_nup
Shift Left=aileront_left
Joystick+Key12 Joystick+Key16=autorudder_high
Joystick1+Key3=trigger2
Joystick+Key3=pitch_auto
MouseLeft=MouseControl
Underscore=thtl_minus
Backspace=thtl_wep
Joystick+Key2=pitch_minus

unquote

Looks like some are default and some I've set (joystick commands).

Edit one of the confUser files and check what the [Hotkey Pilot] section looks like. Rename the others, suffix a number or whatever (confUserold1, ...), so you only have one confUser file.

All I can suggest at the moment, other than a re-install!

Good Luck!

[Al Capwn]

I've run into an issue where some of my key bindings stopped working and once I reset the controls to default and re-assigned what I wanted I haven't had any issues since.

If you setup custom key bindings you may want to save your current config from the in game menu to somewhere safe (or you can always just copy the files manually from your documents folder), and then reset the controls to default and see if you can get your plane started then.

[badfinger]

AUS,

Thanks,

I'll give it another try tonight.

Reinstall? Shudder

binky9

[Al Capwn]

Originally Posted by binky9

AUS,

Thanks,

I'll give it another try tonight.

Reinstall? Shudder

binky9

There would be no reason to reinstall. At worst you would just need to delete your 1C Softclub folder or do a steam verify.