AMD 7970HD 3Gb and CoD

[Ataros]

Originally Posted by Flanker35M

So as an conclusion so far can say SSAO has almost no effect on any area of performance as it had before.

This would be very strange unless processor is the bottle-neck.

Could you log your processor and or GPU load percentage?

[Flanker35M]

S!

Ran Vsync on/off tests with settings above. Results were OK, not much difference but again the track does not represent actual gameplay IMO. But the results

VSync ON

Minimum: 6fps
Maximum: 68fps
Average: 44fps

VSync OFF

Minimum: 11fps
Maximum: 112fps
Average: 46fps

Do you use a logging program of some sort Ataros, will gladly provide CPU/GPU usage stats for you

[Ataros]

Originally Posted by Flanker35M

Do you use a logging program of some sort Ataros, will gladly provide CPU/GPU usage stats for you

Thank you! This one has a "Log to file" checkbox on the 2nd tab for GPU. http://www.techpowerup.com/downloads...-Z_v0.5.8.html

For CPU logging I have not used any recently, maybe someone else can help.

My concern is that with SSAO ON your tests deliver 3-4 fps difference with gtx580 (running 4x AA). But switching SSAO off gives gtx580 substantial fps increase.

Maybe a clean reinstall of drivers with DriverSweeper may help. I would also reinstall directX and .Net after the clean driver installation just in case

[Flanker35M]

S!

Ok, will get that proggie I did clean up old drivers and all. But never hurts to check again. Still the results are very promising as there are no graphical anomalies at all and the shimmering is less too. Back in a moment..testing again

[Ataros]

Originally Posted by Flanker35M

S!

Ok, will get that proggie I did clean up old drivers and all. But never hurts to check again. Still the results are very promising as there are no graphical anomalies at all and the shimmering is less too. Back in a moment..testing again

I am sure that the drivers are not fully optimised yet and there will be 10-15% performance increase in the future at least.

PS. Do you have the UBI logo deleted?

Originally Posted by Flanker35M

are no graphical anomalies at all and the shimmering is less too.

Very good news. So you do not have any stripes on the border of water and land? They bother me a lot.

[Flanker35M]

S!

Yes, got UBI logo disabled. Strangely enough the log shows that my GPU never went above 150/300MHz?!! Maybe the program does not fully support this card yet as it showed no GPU usage either..

Also waiting for new drivers to improve the performance and add to that the patch that should fix a lot of things for us performance wise So good times ahead...

Will continue testing and writing back..Need also to test online as well.

[Ataros]

Originally Posted by Flanker35M

S!

Yes, got UBI logo disabled. Strangely enough the log shows that my GPU never went above 150/300MHz?!! Maybe the program does not fully support this card yet as it showed no GPU usage either..

You can try ATI Tray Tools to make sure. It does not log to file but shows on screen display. http://downloads.guru3d.com/download.php?det=733
Go to Tools & Options >> OnScreenDisplay >> Enable OSD on 1st tab and then >> Flash OSD to configure which info to show (CPU, GPU, etc.)