4.11 - 6DoF debugging

[AndyJWest]

TrackIR 5 worked for me without any need to add anything to conf.ini - I've not got LeanF, LeanS or Raise set at all.

[TheGrunch]

I have:

[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=6

Works fine for me. Are you sure your profile for IL-2 has the other axes enabled?

[Claymore]

Hi !

First I would like to congratulate all DT members involved in the 6Dof addition, specialy for the Fw 190; guys you did a very nice job

I would like to draw your attention on the fact that since the Fw 190 A8 has a "flat canopy" and as the Fw 190 A8 Mistel share with the A8 the external 3D, we have, inside the Mistel cockpit the "Late canopy", the same as the A9 now so it don't match at all...

I think that the mistel should now have the same canopy that A8, exactly what I made in my Fw 190 & ta 152 Pack

Best regards !

[Freelansir]

Originally Posted by AndyJWest

TrackIR 5 worked for me without any need to add anything to conf.ini - I've not got LeanF, LeanS or Raise set at all.

Originally Posted by TheGrunch

I have:

[HookView Config]
AzimutSpeed=0.1
TangageSpeed=0.1
LenSpeed=1.0
MinLen=1.0
DefaultLen=20.0
MaxLen=3000.0
Speed=6

Works fine for me. Are you sure your profile for IL-2 has the other axes enabled?

Thanks for the help guys. It was really working before but since I couldn't lean in real close to read the instruments I thought something wrong. My TrackIR profile I use for other sims and is still okay. Will have to mess around with it more.

My thanks again !