|
|
|||||||
| Controls threads Everything about controls in CoD |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
07-25-2011, 10:27 AM
|
|||
|
|||
planetype and CEM setting please !
|
|
#3
07-25-2011, 12:13 PM
|
|||
|
|||
|
Complex Engine Management
well, if ALL (the planes differ a little bit to be honest....) than , after the engine have started , warm them up ! The Radials need 200° cylinder temperatur as example to work proper  The liquid cooled, 60° for oil and water , at least not lower than 40°, is a good try ! and dont touch the emergency power systems for a normal start................
|
|
#4
07-25-2011, 02:58 PM
|
||||
|
||||
|
If it's a Spit or Hurri,make sure you're rads are open fully on taxing(Especially the Spit),and take off,once airborne you can turn them down to about half open.
Also don't have you're throttle open on full all of the time,the Brit engines don't like it. Can't tell you about the Nazi kites as I don't fly 'em 
__________________
 Alienware Aurora|Win 7 64-bit Home Premium|IC i7-920 Processor (Quad-Core)|14GB DDR3 RAM|1 TB SATA 7200rpm Hard Drive|GIGABYTE GeForce GTX 770 2GB WINDFORCE 3 X fan|Thrustmaster Warthog|Saitek Pro Combat rudder pedals,throttle quadrant and Cessna trim wheel|TrackIR4|Sense of humour,I find it comes in handy!
|
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
