(Semi) Dynamic Campaign: JG 51

[TheEnlightenedFlorist]

Can you guys post the error messages you're getting in your logs? I can't seem to duplicate the problem.

Originally Posted by Raggz

I tried increasing the minimum and maximum number of planes but it seems to affect only friendly planes. Is this correct?

No. It includes all aircraft except the player's flight. If you're still getting mission failed after every mission, any changes to the conf file won't have any effect. They only apply to newly created missions. Missions are only created if the previous one was a success.

[Raggz]

Originally Posted by TheEnlightenedFlorist

Can you guys post the error messages you're getting in your logs? I can't seem to duplicate the problem.



No. It includes all aircraft except the player's flight. If you're still getting mission failed after every mission, any changes to the conf file won't have any effect. They only apply to newly created missions. Missions are only created if the previous one was a success.

Ok, thanks. But i get the message "you died" even when the mission is successful!

[TheEnlightenedFlorist]

Originally Posted by Raggz

Ok, thanks. But i get the message "you died" even when the mission is successful!

If it tells you you died, then the mission wasn't successful. Even if it should have been. This tells me that the code is crashing before a certain point. The only way for me to know where it is crashing is if I can see the logs.

[Raggz]

Originally Posted by TheEnlightenedFlorist

If it tells you you died, then the mission wasn't successful. Even if it should have been. This tells me that the code is crashing before a certain point. The only way for me to know where it is crashing is if I can see the logs.

I'll get a log. It happens in the first mission to and i followed all the way-points and landed safely.


Here's some of the log:

------------ BEGIN log session -------------
Loading mission ...

=================================================
System.Exception: (0,0): error CS0006: Metadata file 'PARTS/DYNAMICCAMPAIGN/JG51_MISSION.DLL' could not be found

at xQOt3lDxHCKGfeHhoXG.nJNIchD1R4RKjSh4lUn.My577M09gx c(String , Boolean , Boolean )
at xQOt3lDxHCKGfeHhoXG.nJNIchD1R4RKjSh4lUn.9XmBbrMFV7 9Tsq2ilpe2(Object , Boolean , Boolean )
at xQOt3lDxHCKGfeHhoXG.nJNIchD1R4RKjSh4lUn.nbX77R2S1p 9(String )
at xQOt3lDxHCKGfeHhoXG.nJNIchD1R4RKjSh4lUn.x4r77gG5cL s(String , Int32 )
=================================================

=================================================
System.Exception: (0,0): error CS0006: Metadata file 'PARTS/DYNAMICCAMPAIGN/JG51_MISSION.DLL' could not be found

at xQOt3lDxHCKGfeHhoXG.nJNIchD1R4RKjSh4lUn.x4r77gG5cL s(String , Int32 )
at 63fmYDM6scICdbkX6oX.OEMHv2MNfTXdfmmeGsD.W7nkOAKl9N (P3dcOOwRZQwsaaAbPNR )
=================================================
Load landscape...
Load bridges
LongBridge: wrong width. (3)
Load static objects...
Server: Raggz will fly for the Blue forces.
Mission loaded. time = 34.523
Battle starting...Server: Battle begins!
ok
Server: The battle ends.

[adonys]

it seems there was an old path remained to point at the mission .dll.

I'll do a log too, if it's needed. And I've asked you something, sir. A simple no would suffice, if you don't wish to share the sources with us. Thank you!

[TheEnlightenedFlorist]

I'm so sorry guys, it was a simple mistake. I've fixed it and uploaded the new version to Airwarfare. Just install it the same way and replace all the old files.

[Ataros]

Hi!
2 reports here say a player explodes in the 2nd mission on spawn constantly. http://www.sukhoi.ru/forum/showthrea...25#post1657025

(screenshots included)

[TheEnlightenedFlorist]

Originally Posted by Ataros

Hi!
2 reports here say a player explodes in the 2nd mission on spawn constantly. http://www.sukhoi.ru/forum/showthrea...25#post1657025

(screenshots included)

Is there anything in the logs? I just generated 24 missions and did not see that happen. There were even a couple where I spawned in what looked like the exact same position.

If possible, I would like the following:

1) Log files.

2) The "current.mis" file located at parts/TEFCampaign/campaign/jg_51

Also, try restarting the campaign. The second mission will be different this time around.

[Ataros]

Thanks, I asked them in that thread. Could it be the case that the script spawns a player aircraft 2 times in a row instead of one? I can not see any other reason for explosion.

They have Russian version of the game btw.

[TheEnlightenedFlorist]

Originally Posted by Ataros

Thanks, I asked them in that thread. Could it be the case that the script spawns a player aircraft 2 times in a row instead of one? I can not see any other reason for explosion.

They have Russian version of the game btw.

That's possible. If that is the case it will be obvious in "current.mis".