![]() |
|
Performance threads All discussions about CoD performnce |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Huh?
|
#2
|
||||
|
||||
![]()
Maybe White Owl is using an older Catalyst Control Centre where switching Cat AI Off is possible. Or Ati Tray Tool or the newer Radeon Pro app.
I'm very happy with the 5870 I bought just before the 6xxx series came out. Luckily for me the blue lines aren't showing up. I can't tell if it's a driver problem or something from CloD that's wrong - but my best guess is that Ati has the answer. Some of us may recall the problems back in 2008; where using nav lights or guns caused a purplish glow to surround a plane. It took 3 or 4 months of complaints to the 'Catalyst Crew' before they a) took notice, and b) released a fix. Expect the same, and remember to send your 'feedback' to the Crew after the release of every driver if the problem persists.
__________________
Another home-built rig: AMD FX 8350, liquid-cooled. Asus Sabretooth 990FX Rev 2.0 , 16 GB Mushkin Redline (DDR3-PC12800), Enermax 1000W PSU, MSI R9-280X 3GB GDDR5 2 X 128GB OCZ Vertex SSD, 1 x64GB Corsair SSD, 1x 500GB WD HDD. CH Franken-Tripehound stick and throttle merged, CH Pro pedals. TrackIR 5 and Pro-clip. Windows 7 64bit Home Premium. |
#3
|
|||
|
|||
![]()
Congrats on the new hardware Tony, and thanks for the feedback.
Have you noticed any performance difference with the extra memory that the 6970 has? (In terms of stutter.) |
#4
|
|||
|
|||
![]()
Rattlehead: thanks, and there are no stutters, even over London with the 'Buildings Unlimited' setting. I only noticed stutter on my last card when I changed some setting that (I assume) resulted in requiring more VRAM than available. Unfortunately there appears to be no way to measure VRAM usage on this card, or my last one for that matter.
__________________
I'd rather be flying ... Gigabyte 990FXA-UD5 | AMD FX-8350 | MSI HD7970 TFOC-BE | 8GB Corsair DDR-III 1866 | Win8.1 Pro 64-bit
Last edited by TonyD; 05-18-2011 at 04:50 PM. Reason: clarity |
#5
|
|||
|
|||
![]()
S!
Try the latest Catalyst 11.5a HotFix drivers. Smooth for me. I do not take the Black Death as ultimate game performance gauge. I get far more fluid graphics in game than in the track. Also the track is filled with console errors, in game none. My 6970HD runs at around 70'C on default settings in games, never exceeding 80'C. Anyways, enjoy the card TonyD, it is a good one! |
#6
|
|||
|
|||
![]()
Don't worry too much about the temps with this card. It's normal that it operates >90C under full load.
The reason you didn't initially get better performance in the Black Death track is probably not because of your card. The bottleneck here could very well be your CPU which leaves the card almost idleling because a lack of data to process. At least that was the case with my old CPU (Atlon II X4 640 @ 3,42 GHz). With this CPU, my video cards GPU was only utilized about 50% on average on the Black Death track. |
#7
|
|||
|
|||
![]()
Thanks, Flanker
Quote:
![]() It's running very well if you ignore the horizon ...
__________________
I'd rather be flying ... Gigabyte 990FXA-UD5 | AMD FX-8350 | MSI HD7970 TFOC-BE | 8GB Corsair DDR-III 1866 | Win8.1 Pro 64-bit
|
![]() |
Thread Tools | |
Display Modes | |
|
|